2012 | FULL-LINE CATALOG - Miller

Plasma Cutter Accessories
(cont.)
Plugs and Cords
MVP Plugs
#219 258
For power cable
6-50P (230/
240 V, 50 A).
#219 261
For power cable 5-15P
(115/120 V, 15 A).
#219 259
For power cable 5-20P
(115/120 V, 20 A).
For Spectrum 375 X-TREME, Millermatic
211 Auto-Set with MVP, Millermatic
Passport Plus, Maxstar 150 models, and
Diversion 180. Allows connection of
machine to 115/120-volt or 230/240-volt
receptacles without tools — just choose
the plug that fits the receptacle.
NEW! MVP Adapters
Female
Receptacle
#254 328
For connection to
6-50P receptacle
(240 V, 50 A).
#254 330
For connection to
5-15P receptacle
(120 V, 15 A).
#254 331
For connection to
5-20P receptacle
(120 V, 20 A).
For Spectrum 625 X-TREME. Allows
connection of machine to 120- or
240-volt receptacles without tools —
just choose the adapter cord that fits
the receptacle.
Female
Receptacle
Adapter Cord, Full KVA
#300 517 Field
NEMA 14-50P to NEMA 6-50R. Adapts
engine drive 120/240-volt plug to
common Millermatic and Spectrum
240-volt plug.
Protective Covers
86
#195 144 cover shown.
ACCESSORIES
#195 144
For Spectrum
125C and 375.
#300 388
For Spectrum
875.
Torches
#300 184
X-CASE for
Spectrum 375
X-TREME and
625 X-TREME,
and Maxstar
150 models.
See your Miller® distributor for complete
information on the following ICE and XT
plasma torches and their consumables:
Spectrum plasma cutter torches:
ICE-12C Hand-Held For 125C.
NEW! XT30C Hand-Held For 375.
NEW! XT30 Hand-Held For 375 X-TREME.
NEW! XT40 Hand-Held For 625 X-TREME.
ICE-60T Hand-Held
For 875 and 875 Auto-Line.
ICE-60TM Machine-Held
For 875 Auto-Line.
ICE-60TM Machine-Held Torch Package
#300 759 25 ft. (7.6 m)
#300 760 50 ft. (15.2 m)
For Spectrum 875 Auto-Line. Package
includes ICE-60TM machine-held torch,
remote control cable (#220 240), voltage
sensing kit (#246 285), torch sense tab
(#226 763), remote pendant control
(#195 513) and internal remote control
lead kit (#246 287).
Plasma Torch Consumable Kits
#222 938 For ICE-12C.
#253 520 For XT30C and XT30.
#253 521 For XT40.
#239 086 For ICE-60T.
#127 493 Empty consumable box.
Polarity Switches/Controls
DC Polarity Reversing Switch Kit
#043 942 Field
For Big Blue 400 and 500. Changes DC
polarity without using tools.
Polarity Control #042 871
This dual-function control is designed
for use with dual wire feeders or any
application where electrical isolation
and/or polarity reversing of weld current
is required. Both functions can be used
at the same time.
Process Selector Control #042 872
For CC, CV or CC/CV welding power
source. Provides easy way to change
welding process. Also includes features of
Polarity Control.
Remote Controls
See also TIG Accessories Remote
Controls on page 87.
PRHC-14 Hand Control
#195 511
For all solid-state power
sources after serial
number JK674521.
Complete current or voltage control brings
120 volts of GFCI power to work area in a
single cord. Housed in a durable and light
aluminum case and includes 125-foot
(38 m) cord with plugs.
Remote On/Off Control #242 197 025
For Deltawelds, Gold Stars, and Dimensions.
Allows you to turn power source on or off
from a distance of 25 feet (7.6 m). This is
useful if power source is up in a mezzanine.
RHC-3GD34A
Remote Hand Control
#041 122
For Big Blue 400 CC and 500 CC.
Remote hand amperage control. Includes
20-foot (6 m) cord and plug.
Stick Accessory Kits
No. 2 Stick Cable Sets
#195 196 15 ft.
#300 836 50 ft.
Consists of either 15- or 50-foot electrode
cable with holder and work cable with
clamp. 200 A, 100% duty cycle.
2/0 Stick Cable Set (50 ft.) #173 851
Consists of 50-foot 2/0 electrode cable
with holder and 50-foot work cable with
clamp. 350 A, 100% duty cycle.
2/0 Stick Cable Set (100/50 ft.)
#043 952
Consists of 100-foot 2/0 electrode cable
with holder and 50-foot work cable with
clamp. 300 A, 100% duty cycle.
Weld Cables
#195 457 Cable w/Electrode Holder
#195 458 Cable w/Work Clamp
Consists of a stud/Tweco® adapter and
10-foot 2/0 weld cable with a Tweco
male connector and either an electrode
holder or work clamp. Rated up to 400 A.
2/0 Weld Cable
Extensions
#195 456 50 ft.
#195 455 100 ft.
For use with weld cables (#195 457)
and (#195 458).
Sub Arc Accessories
Consumables Handling
Flux Hopper with Valve
#194 775
25-pound (11 kg) capacity
hopper with automatic flux
valve and slag screen.
Includes 11-foot (3.4 m)
power cord.
Flux Recovery Systems
Contact the following suppliers for
Miller®-compatible flux recovery systems.
American Vacuum 1-800-321-2849
Invincible 1-800-282-6999
Weld Engineering 1-508-839-9875
Wire Reel #108 008
Supports 60-pound (27 kg) coil of
wire. Requires Spool Support Assembly
(#119 438).
Wire Straightener #199 733
Required for RAD-400 and RAD-780 wire
drive assemblies. Compatible with
1/16 –7/32 inch (1.6 – 5.6 mm) wire.
Control Accessories
Basic Cable Kit #195 308
For digital and analog HDC 1500 controller.
Includes 30-foot (9 m) 14-pin interconnect
cable and 10-foot (3 m) motor cable.
Control Cable Extensions*
#242 205 025 25 ft. (7.6 m)
#242 205 050 50 ft. (15 m)
#242 205 080 80 ft. (24.4 m)
14-pin welding power source control
cable extends distance between power
source and controller.
*Custom lengths available in 5-foot increments
up to 50 feet and 10-foot increments up to
100 feet.
Motor Extension Cable #195 342
25-foot (7.6 m) extension for motor cable
supplied in Basic Cable Kit (#195 308).
Light-Duty Cross Slide #195 411
Allows 6 inches of travel adjustment.
Two units can be stacked to provide
vertical and horizontal movement.
Not recommended for tandem.
Heavy-Duty Cross Slide #300 482
Allows for 6 inches of travel adjustment
and has a load capacity of 200 pounds.
Recommended for tandem.
Drive Assembly Drive Rolls
V-knurled drive rolls for use with
hard-shelled cored wires.
SAW4 Recommended Drive Rolls
#132 955 1/16 in. (1.6 mm)
#132 960 5/64 in. (2.0 mm)
#132 961 3/32 in. (2.4 mm)
#132 962 7/64 in. (2.8 mm)
RAD-400 Recommended Drive Rolls
#132 963 1/8 in. (3.2 mm)
#193 700 5/32 in. (4.0 mm)
RAD-780 Recommended Drive Rolls
#193 701 3/16 in. (4.8 mm)
#193 702 7/32 in. (5.6 mm)