2012 | FULL-LINE CATALOG - Miller

Load Banks
84
ACCESSORIES
Trailers See Literature No. AY/20.0
HWY-1000 Trailer #195 013
For Wildcat 200, Bobcats, and Trailblazers
(except Air Pak model). A 1000-pound
(454 kg) capacity highway trailer with
welded steel tubing frame, heavy-duty axle
with roller bearing hubs and leaf-spring
suspension. Includes jack stand, 2-inch
(50 mm) ball hitch, fenders and lights.
Model
HWY-1000
4 West
HWY-224
OFR-224
LBP-350 #043 329
Designed to provide
an adjustable load
for troubleshooting
or calibrating welding
power sources or generators. Standard
equipment includes analog meters for both
AC and DC output with jacks for external
metering connections. It comes with a
13-foot (4 m) 115-volt power cord and has
seven 50-amp load switches, providing a
maximum capacity of 350 amps.
Welding Power Load
Bank #902 804
Design ed to load test the
output of transformer -type,
engine- or motor-driven
generator welding power
sources. This unit can be used to test AC
or DC welder outputs, and to demonstrate
welding equip ment to customers.
Meters
Gross Axle
Weight Rating
1500 lb.
(680 kg)
2000 lb./axle
(907 kg/axle)
3500 lb.
(1588 kg)
Gross Vehicle
Weight Rating
1265 lb.
(574 kg)
3000 lb.
(1361 kg)
2960 lb.
(1343 kg)
Digi-Meter
#041 656
Used to monitor
welding voltage
and amperage of constant-voltage and
constant-current arc welding power
sources, and engine-driven welding
generators. This unit is not designed to
measure primary voltage and amperage.
Digital Meters #043 812 Field
For Gold Star models AFTER serial number
KG283595. Easy-to-install, front-panelmount,
digital amp and volt meters.
Digital Weld Meters Kit #195 289 Field
For Big Blue 400 Eco Pro.
4 West Four-Wheel Steerable
Off-Road Trailer #042 801
For Big Blues. Heavy-duty 2570-pound
(1166 kg) capacity trailer designed for use
in mines, quarries, and other rough terrain.
Has narrow 22-foot (6.7 m) turning radius.
Includes 3-inch lunette eye, universal hitch
and safety chains.
Note: Trailers are shipped unassembled. *Width at outside of fenders. **Does not include tongue.
Net Payload
1000 lb.
(454 kg)
2570 lb.
(1166 kg)
2650 lb.
(1202 kg)
Height
of Bed
18.5 in.
(470 mm)
21.25 in.
(540 mm)
18.5 in.
(470 mm)
SuitCase Wire Feeder Meter Kits
#300 331 Field For X-TREME 8VS.
#195 169 Field For 12RC BEFORE
serial number LF232632.
#300 178 Field For 12RC AFTER
serial number LF232631.
Weld Ammeter and Voltmeter Kit
#195 131 Field For Big Blue 400, 500,
and Air Pak. Panel-mounted analog
meters monitor welding output.
MIG Accessories
Accessory Kits
#300 405
kit shown.
Road
Clearance
6.5 in.
(165 mm)
8 in.
(203 mm)
7.5 in.
(191 mm)
Industrial MIG 4/0 Kit #300 390
Consists of Smith® regulator/flowmeter
with 10-foot (3 m) gas hose, 10-foot
(3 m) 4/0 feeder weld cable with lugs,
and 15-foot (4.6 m) work cable with
600-amp C-clamp.
Industrial MIG 4/0 Kit with Dinse
Connector #300 405
Same as above except weld and work
cables have Dinse connector on one end
instead of lug.
Shopmate 300 MIG Kit #300 150
Includes Smith® Ar/CO2 regulator
with flowtube, 10-foot (3 m) gas hose,
10-foot (3 m) 1/0 inter connecting cable,
15-foot (4.6 m) 1/0 work cable with
clamp, and consumable storage box.
HWY-224 Trailer #043 805
OFR-224 Trailer #043 802
For Bobcats, Trailblazers, and Big Blues.
A 2650-pound (1202 kg) capacity trailer
with welded steel tubing frame, heavy-duty
axle with roller bearing hubs and leafspring
suspension. Includes jack stand,
and 2-inch (50 mm) ball hitch. HWY-224
also includes fenders and lights.
Track (Center to
Center of tires)
50 in.
(1270 mm)
55.25 in.
(1403 mm)
52 in.
(1321 mm)
Protective Covers
Pulsing Control
Standard Tires (Standard
Rating or P-size Rating)
4.8-12
B78-13
B-78-13
#195 149
For Millermatic 140
Auto-Set, 180
Auto-Set, and 211
Auto-Set with MVP.
#195 142
For Millermatic 212
Auto-Set, 252 and
350P. Features side
pocket.
Optima MIG Pulse
Control #043 389
For XMT CC/CV models.
A multipurpose, micro -
processor-based pulse
control for synergic MIG
(wire welding or GMAW),
manual MIG pulsing or standard MIG
welding. Use this control with above
power sources and any Miller wire feeder,
including automatic feeders and spool
guns. Includes 25-foot (7.6 m) cord with
14-pin plug.
MIG Gun Accessories
MIGmatic M-Series Consumable Kits
#234 607 .023-in. wire For M-100/M-150.
#234 608 .030-in. wire For M-100/M-150.
#234 609 .035-in. wire For M-100/M-150.
#234 610 .030-in. wire For M-25.
#234 611 .035-in. wire For M-25.
#234 612 .045-in. wire For M-25.
Contains contact tips, tip adapters, nozzle
adapters and a standard nozzle.
Trailer Accessories
Dual Hitch #300 831
For HWY-1000, HWY-224, and OFR-224.
Combination 2-inch (50 mm) ball and
3-inch (76 mm) lunette eye in one
reversible assembly.
Cable Tree
#195 023 For HWY-1000.
#043 826 For HWY-224 and OFR-224.
Provides an area to conveniently wrap
weld cables and extension cords.
Fender Kit #300 160
For HWY-224 and OFR-224. Add
fenders to OFR-224 or replacement
fenders for HWY-224.
Dimensions
L: 98 in. (2489 mm)
W: 57.5 in. (1460 mm)*
L: 91 in. (2311 mm)**
W: 61.25 in. (1556 mm)
L: 105 in. (2667 mm)
W: HWY– 59.5 in. (1511 mm)*
OFR–58.437 in. (1484 mm)
Net
Weight
265 lb.
(120 kg)
430 lb.
(195 kg)
320 lb.
(145 kg)
Roughneck® Aluminum Conversion Kit
#202 895
Allows 10-foot Roughneck guns to feed
3/64 –1/16 inch aluminum wires.
Roughneck® Consumable Kit #206 073
Contains contact tips, diffuser, nozzle,
nozzle insulator and gun hook.
Roughneck® Gun Hook #199 662
Enables Roughneck gun to be stored
between welds.
Roughneck® Locking Trigger Switch
#199 661
Allows Roughneck trigger to be locked
during long welds.
Roughneck® Machine Adapter Kits
#199 663 For older Hobart and
Thermal products.
#199 664 For Lincoln products.
Adapts Roughneck guns to be used with
listed products.
Ironmate .045 Conversion Kit
#199 178
Allows FC-1260 and FC-1260LM guns to
feed .045-inch self-shielded wire.
Bernard® Aluminum Gun Kits
#300 541 .035 in., 10 ft. (3 m)
#300 542 .047 in., 12 ft. (3.7 m)
#300 543 1/16 in., 12 ft. (3.7 m)
For Axcess Systems and 70 Series. These
aluminum gun kits have components
designed specifically for pushing aluminum
wire. Includes U-grooved .035-, .047or
1/16-inch drive rolls, plastic guides,
specific aluminum consumables, and a
10- or 12-foot Bernard Q-Gun.