Comfort 250, 252 - Marantec
Comfort 250, 252 - Marantec
Comfort 250, 252 - Marantec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
D. Installation<br />
• Insert the door link (E) with bolt (G) into the carriage (F).<br />
• Fix it with 2 screws.<br />
• Connect door link and door link bracket.<br />
10<br />
Advice!<br />
Remove the door locks or put them out of operation!<br />
Attention!<br />
In case the upper door lamella does not contain any stiffening<br />
plates or reinforcement straps (e.g. with one-wall doors):<br />
Use additionally door connector attachment Special 111,<br />
Art.-No. 47 574 (not part of the supply package, compare Fig. D 15).<br />
In the other case please only use the door connector elements,<br />
because there is enough stability due to the stiffening.<br />
Garage door operator for retractable up-and-over door<br />
Required accessories:<br />
• Adapter arm Special 102, Art.-No. 563 828<br />
• Photocell Special 613, Art.-No. 153 550<br />
• Photocell Special 614, Art.-No. 152 675<br />
• 2-wire photocell, Art.-No. 47 816<br />
These are not part of the supply package <strong>Comfort</strong> <strong>250</strong>, <strong>252</strong>.<br />
Advice!<br />
Remove the door locks or put them out of operation!<br />
English Page 12