Comfort 250, 252 - Marantec
Comfort 250, 252 - Marantec
Comfort 250, 252 - Marantec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
D. Installation<br />
While lowering the boom and by extending the linking bar the door opening<br />
is enlarged. The linking bar may only be extended so far that the inner pressure<br />
rolls (H) do not touch the fixing screws (I).<br />
11<br />
12<br />
Suspension of the operator system<br />
Suspension of motor unit<br />
• Fix 1 support plate (A) above the motor unit (see as well point 3).<br />
• Bend the plate according to site requirements.<br />
Suspension of boom<br />
• Push 1 support plate (A) through suspension clamp (B) and bend projecting<br />
parts.<br />
• Positioning of the suspension of boom (see as well point 3).<br />
Installation of the bulb<br />
• Turn in a bulb E14 (max. 40 W).<br />
• Clip in the lamp cover.<br />
Attention!<br />
Please disconnect by all means the unit from power supply<br />
before you change the bulb.<br />
• Turn in the securing screw.<br />
After given impulse the bulb is on for approx. 3 min.<br />
English Page 14