Comfort 250, 252 - Marantec

More documents

Recommendations

Info

G. Display functions and programming possibilities 4. Programming 'early closing after passing the driveway photocell' LED 4 flashes. Advice: This function is only possible if automatic timer function has been activated. • With button or the function 'early closing after passing the driveway photocell' can be set (according to table). LED 1 flashes The door closes after the set time period. LED 1 is on The door closes after passing the driveway photocell. • Save your setting with programming button . The programming in the 3rd programming level of the operator is terminated, recognizable by all LED's going out in sequence 8 - 1. The control unit is now in operating mode (in case of power failure all settings remain unchanged). English Page 48
G. Display functions and programming possibilities English Page 49 GB GB
Page 1 and 2: Comfort 250, 252 Operator System fo
Page 3 and 4: A. Contents A. Contents............
Page 5 and 6: B. Meaning of symbols Symbols of co
Page 7 and 8: C. Important safety advice • All
Page 9 and 10: D. Installation 4 Connect boom with
Page 11 and 12: D. Installation • Connect two doo
Page 13 and 14: D. Installation • Screw the linte
Page 15 and 16: D. Installation 13 Advice! Bulbs ar
Page 17 and 18: E. Hand transmitter 14 Hand transmi
Page 19 and 20: E. Hand transmitter Advice! For mul
Page 21 and 22: F. Control unit connections 17 Conn
Page 23 and 24: G. Display functions and programmin
Page 47: G. Display functions and programmin
Page 79 and 80: H. Test instructions Remedies • C
Page 81 and 82: J. Initial operation and maintenanc
Page 83 and 84: L. Index of illustrations Fig. D.1:
Page 85 and 86: Produkt product produit Angewandte
Page 87 and 88: Produkt product produit Einschlägi

Comfort 250, 252 - Marantec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?