Comfort 211 accu / solar - Marantec
Comfort 211 accu / solar - Marantec
Comfort 211 accu / solar - Marantec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6. Installation<br />
6.2 Installation of the operator<br />
and booms<br />
6.2 / 1<br />
B<br />
A<br />
• Place the adapter sleeve (A) as far as possible<br />
on the gear shaft (B).<br />
Caution!<br />
The booms must be carefully mounted<br />
on the operating unit.<br />
Do not use force when mounting<br />
otherwise the gear teeth will be<br />
damaged!<br />
• Align the boom (C) parallel to the surface of the<br />
operator unit.<br />
• Place the boom (C) in its correct position to the<br />
adapter sleeve.<br />
• Lower the boom onto the operator unit using slight<br />
pressure.<br />
Manual for installation and operation, <strong>Comfort</strong> <strong>211</strong> <strong>accu</strong> / <strong>solar</strong> GB (#73385) 13<br />
6.2 / 2<br />
4,0 x 10<br />
C<br />
E<br />
D<br />
A<br />
E<br />
Tip:<br />
If the boom is correctly aligned,<br />
a short pull on the operator unit<br />
(chain drive, toothed drive belt or ball<br />
cable) is sufficient to lower the boom.<br />
• Screw the boom to the operator unit using both<br />
boom clamps (D) and four screws (E).