Comfort 211 accu / solar - Marantec
Comfort 211 accu / solar - Marantec
Comfort 211 accu / solar - Marantec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7. Hand transmitter<br />
7.2.2 Change coding<br />
This function is used to change the remote control<br />
coding if a hand transmitter has been lost.<br />
7.2.2 / 1<br />
• Insert the transmission plug into the hand transmitter.<br />
• Short-circuit one of the two outer pins of the<br />
transmission plug with the centre lead<br />
(e.g. by means of a screwdriver).<br />
• Actuate the desired button on the hand transmitter.<br />
New coding is determined by integrated random<br />
programming.<br />
The LED flashes quickly.<br />
As soon as the LED lights up permanently, the hand<br />
transmitter has learned the new coding. The button<br />
can be released and the transmission plug removed.<br />
Advice:<br />
After transferring the new coding to<br />
the hand transmitter, the operator has<br />
to be re-programmed for new coding.<br />
For multi-channel hand transmitters,<br />
the coding process has to be carried<br />
out for each button separately.<br />
Manual for installation and operation, <strong>Comfort</strong> <strong>211</strong> <strong>accu</strong> / <strong>solar</strong> GB (#73385) 31