Mygo Seating System User Instructions - Leckey

7.1 Setting the
backrest
The backrest will be folded down for
shipping. Raise it into the vertical position
and, while doing so, slide the inner tube into
the receiving outer tube.
Secure the backrest in an upright position
and tighten the socket cap. Check that it is
secure and does not move when pressure
is applied. If the user thrusts forward or
backwards they could cause injury to
themselves or their carers.
Always make sure the backrest is
attached securely.
Use caution when inserting inner tube
as there could be possible finger nip.