Mygo Seating System User Instructions - Leckey

More documents

Recommendations

Info

11.1 Transferring your child into and out of the seat Before transferring the child into the seat carry out the daily product inspection as outlined in section 13 of this user manual. Adjust the seat to a comfortable height to facilitate transfer. Lock all the castors, ensuring that they are facing outwards to maximise product stability. Make sure the safety buckle on the chest harness is released and is out of the way to facilitate transfer. If the seat has flip-away thoracic laterals, first move these out of the way using knob A. Unclip the pelvic harness or Pelvic Cradle in the middle, undo the side velcro of the Pelvic Cradle and allow the harness to open out to facilitate transfer. Lastly if sandals are fitted open the straps. You are now ready to transfer or hoist the child into the seat. The pelvic harness and Pelvic Cradle are fastened using the middle buckle, and side velcro (in the case of the Pelvic Cradle). Always secure the pelvic harness or Pelvic Cradle first before fastening other buckles or harnesses. Adjust the harness so the child cannot slide or creep forward in the seat. A
11.2 Adjusting the pelvic harness or Pelvic Cradle The correct positioning and tensioning of the pelvic harness or Pelvic Cradle is key to a child’s postural management, affecting their comfort and ability to carry out activities. Please consult with your therapist to ensure the harness is positioned correctly and that the straps are tensioned appropriately. To tension the pelvic harness straps and pads around the child pull the centre strap (A). Pull the two side straps up to fine tune the pelvic position and adjust (B) the height of the pads on the hips. Pelvic harness (Size 1 or Size 2) B A To tension the Pelvic Cradle use the 4 side straps (C) and the velcro tabs (D). If using the seat outdoors and your child is wearing a coat, position the pelvic harness or Pelvic Cradle under the coat. Pelvic Cradle (Size 2 only) C C
Page 1:
Mygo Seating System User Instructio
Page 4 and 5:
1. Intended Use The Mygo Seating Sy
Page 6 and 7:
6.15 Clean the product regularly. D
Page 8 and 9: How to unpack and assemble the seat
Page 10 and 11: 7.1 Setting the backrest The backre
Page 12 and 13: 7.3 Attaching the seating system to
Page 14 and 15: 7.5 Attaching the headrest To attac
Page 16 and 17: 7.8 Attaching the kneepads Attach t
Page 18 and 19: 7.12 Attaching the grab rail To att
Page 20 and 21: To fit the dynamic backrest, insert
Page 22 and 23: 7.16 Interfaces for wheelchair and
Page 24 and 25: 8.1 Back pack contents 8.2 Attachin
Page 26 and 27: 8.4 Activity Setting Record Cards a
Page 28 and 29: 9.1 Femoral cushions (Size 1 only)
Page 30 and 31: 9.3 Flexible sacral cushion The fle
Page 32 and 33: 9.7 Hip laterals These hip laterals
Page 34 and 35: 9.9 Backrest cushion If you have la
Page 36 and 37: 9.12 Chest harness The chest harnes
Page 38 and 39: 9.15 Flat headrest cushion Place th
Page 40 and 41: 10.1 Pelvic Harness 10.2 Pelvic Cra
Page 42 and 43: 10.4 Backrest depth The backrest de
Page 44 and 45: 10.6 Backrest angle The backrest ca
Page 46 and 47: 10.8 Adjusting the upper leg suppor
Page 48 and 49: 10.10 Footplate height To set the h
Page 50 and 51: 10.12 Flexible sacral support The f
Page 52 and 53: E A A B E C C D
Page 54 and 55: 10.18 Shoulder Support Laterals (Si
Page 56 and 57: 10.22 Tray Adjustment The height an
Page 60 and 61: If the child is active or has exten
Page 62 and 63: 11.5 Height Adjustment - Hi-low cha
Page 64 and 65: 11.7 Adjusting the Dynamic Backrest
Page 66 and 67: 11.9 Sandals To position the user
Page 68 and 69: 11.12 Grab rail adjustment To set t
Page 70 and 71: 12 Cleaning & Care Information How
Page 72 and 73: 14 Annual Product Inspection (Thera
Page 74 and 75: 17 Technical Information Product an
Page 76 and 77: Leckey Hi Low base options Foot Ped
show all

Mygo Seating System User Instructions - Leckey

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?