9986252-DVB Satellite Receiver UFD 545 - Kathrein

Controls, Indicators, Displays and Connections
Bedienelemente, Anzeigen und Anschlüsse
In this section you will find a short description of all controls, indicators, displays
and connections. The button symbols used here are also used in the description of
the operating steps.
Front view
(panel folded down)
CARAVAN DIGITAL ANALOG RECEIVER
Rear view
Controls, indicators and displays on the
front panel
1 ON/OFF switch (with mains disconnection)
2 Menu button to display and exit the menus
or submenus
3 Acknowledgement for remote control signal
4 Select button
to confirm a selection
5 Operation indicator
6 Standby indicator
REMOTE TV/SAT STAND BY
7 Cursor buttons to move through menu and
channel lists as well as to set the volume
(corresponds to remote control)
8 LED display (four-digit, 7-segment display)
to show channel number and time.
9 Press catch for front panel
To open press lightly on upper right side
MENU
SELECT
1 2 3 4 5 6 7 8 9
Controls and connections at the rear
1 Antenna input (terrestrial)
2 Modulator output
3 Audio output
2 Cinch socket outputs, left and right
channel
4 Digital sound output (AC3) – Cinch socket
output
5 Video output (FBAS)
6 SCART socket TV connection
7 SCART socket VCR/AUX connection
8 DATA input/output socket
Interface for serial data transmission
(service)
9 Satellite IF signal input
Output of LNB supply voltage and control
signals (22 kHz and DiSEqC 1.1)
10 Satellite IF signal output
Bridged Sat-IF signal
11 Satellite IF input for analogue reception
12 Mains power input 230 V AC
13 DC voltage input 12…24 V
Digital Video Broadcasting
1 2 3 4 5 6 7 8 9 10 11 12 13
9