full PDF - Fellers

• Attach signs with Velcro ® or screws, or apply
vinyl directly to Signicade
• Available in white or yellow.
• Add 5 pounds of sand per side for added stability
• Recessed display area helps protect the sign
from weather
• Patented locking hinge keeps signs open.
• Made from high density polyethylene, which
means no discoloration or maintenance
• Stack lugs for easy storing and transport, signs
will not slide
Squarecade Signicade Signicade
Squarecade
• Height 36”, width 25”, weight 17 lbs each
• Display area 24”x 24”
ea. SQUARECADE(W or Y)
Signicade
• Height 45”, width 25”, weight 18 lbs each
• Display area 24”x 36”
ea. SIGNCADE(W or Y)
• Signicade Deluxe has “stay tabs” that lock
graphics in place without the need for Velcro ® or
screws, unlike Signicade
• Holds 2 signs 24” wide x 36” tall
• Visual area of sign is 24” x 35 1/8”
• Use Coroplast or other material 3/16” or less
• Ballasting columns - add sand to each leg for
additional weight
• Hinges lock in open
position and prevent
over-extended sign
faces
ea.
SIGNICADEDELUXE(B or W)
• Available in White or Black
• Overall Size 40.70”x 30.66”, weight 10.3 lbs
• Double-sided, holds (2) 24”x 36” Sign Blanks
• Simple assembly
• Works with
Coroplast and other
rigid substrates
• Narrow footprint
• Feet can be filled
with water or sand
• Change signs in
seconds with no
hardware
Plasticade Sidewalk Sign
ea. specify White or Black
SIDEWALKSIGN(W or B)
• Height 30.5”, width 26”
weight 6.8 lbs. each
• Display two 18” x 24” sign
blanks in each frame
• Made from high density
polyethylene, which
means no discoloration or maintenance
• Change signs in seconds with no hardware
• Blanks quickly slide in and out and stay securely
in place
• No clips, bolts, latches or added parts
• Molded-in “stacking lugs” nest together when
stacked to prevent sliding
ea.
QUIKSIGN
U.S Patent # 5,288,453
• Height 34”, width 23”,
weight 8 lbs each
• Display two vinyl signs
22”x 28 in each frame
• Made from high density
polyethylene, which
means no discoloration or
maintenance
• Apply printed vinyl signs, or cut vinyl graphics
directly to the polyethylene sign face
• No clips, bolts, latches or added parts
• Molded-in “stacking lugs” nest together when
stacked which prevents sliding
ea.
SIMPOSIGN
U.S Patent # 5,288,453
• Height 36”, width 24”,
weight 8 lbs each
• Display two 22”x 28” sign
blanks in each frame
• Made from high density
polyethylene, which
means no discoloration or maintenance
• Great for use with aluminum or corrugated plastic
blanks
• Change signs in seconds with no hardware
• Blanks quickly slide in and out and stay securely
in place
• No clips, bolts, latches or added parts
• Molded-in “stacking lugs” nest together when
stacked which prevents sliding
ea.
SIMPOSIGN2
U.S Patent # 5,288,453
WindSign
• Grey plastic durable design won’t rust
• Easy assembly in less than 5 minutes
• Springs connect frame allowing sign to resist
strong winds
• Sign “Quick Change” feature, NO bolts! Slide it in
• Works with Coroplast and other rigid substrates
• Molded handle and wheels assure easy mobility
• Two-sided (holds two signs per frame)
• Base can be filled with water or sand (90 lbs
when filled with sand)
• Tie down hole allows for securing, deterring theft
WindSign II
Sidewalk Signs
WindSign Holds 22” x 28” Sign Blank
ea.
WindSign: 32.75”h x 24”w x 2.5”d, weight 16 lbs
(40”h x 26”w on base assembly)
WINDSIGN
WindSign II Holds
24” x 36” Sign Blank
• Heavy duty springs resist head-on winds up to
60 mph
• Stay Tabs eliminate the need for clips to secure
the sign material
• New sturdy base with larger sand fill hole (115 lbs
when filled with sand)
• Extended life, solid, built-in wheels
• Reinforced and strengthened frame
• Tool-free assembly - 2 easy to tighten bolts
• Patented Quick Change feature
ea.
WindSign II: 42.9”h x 26”w x 2.5”d, weight 25 lbs
(53”h x 28.7”w on base assembly)
WINDSIGN2V2
“Use antifreeze or sand in your
Plasticade, not water, to weigh
it down. Water can freeze and
break your Plasticade stand!”
– Frank
111
Supplies