full PDF - Fellers

Solaris Solvent Inks and Supplies - Mimaki
Solaris SS2 Lite Solvent Ink For JV3 Printers
• High adhesion, low shrinking ink formula
• Works on a broad range of medias, including many static cling materials
• Chipped 440ml cartridges work with all firmware versions
• Process Cyan, Process Magenta, Process Yellow, Process Black, Light Magenta, and Light Cyan
• Mix and match with OEM inks without flushing or re-profiling
Mfg in the USA by
LiqueColor, Inc
Solaris 440ml SS2 Lite Solvent Ink for JV33 Printers
• Fully compatible with OEM Mimaki SS2 Inks, no need for flushing or reprofiling
• Maximum outdoor life for prints due to the use of automotive grade pigments
in the ink
• Maximum print head and damper life due to the purity of the ink
• Made in the USA
78
Mfg in the USA by
LiqueColor, Inc
ea. 440ml cartridge ea. 440ml cartridge
SOLARISJV3440(COLOR) SOLARISJV3440FFLUID
ea. 440ml cartridge
SOLARISJV33440(COLOR)
Printing tip for optimal fade resistance:
Print at least 720 x 720 or higher.
Mfg in the USA by
LiqueColor, Inc
Solaris SS2 Lite Solvent Ink for JV3, and
SS21 Lite Solvent Ink for JV33 or CJV-30 Printers
• Fully compatible with OEM Mimaki SS2 Inks, no need
for flushing or re-profiling
• Maximum Outdoor life for prints due to the use of
automotive grade pigments in the ink
• Maximum print head and damper life due to the
purity of the ink
• Made in the USA
• Each liter of ink includes 1 - 1 liter chip
• If switching from a 3rd party ink you must flush the
printer with that brand of flushing fluid and then flush
with the Solaris SS2 flushing fluid then replace all
cartridges at once
Process Cyan, Process Magenta, Process Yellow, Process Black, Light Magenta, and Light Cyan
Mfg in the USA by
LiqueColor, Inc
Solaris Universal Ink Remover and Cleaning Kit
Solaris Ink Remover is safe use on most ECO/LT/FULL solvent printer’s
plastic and painted metals without fear of damaging your cleaned part.
Solaris Ink Remover allows you to clean and restore your printer to like new
condition.Safe to use on rubber wipers, capping stations, cleaning around the
printheads, print platens and heaters, and plastics and painted surfaces. May
be used on Mimaki, Roland, Mutoh, Seiko and HP printers. Not recommended
for use as a head wash.
Sold as a 250ml bottle of ink remover or buy in a
cleaning kit which includes 250ML of Solaris Ink
Remover (with flip top cap), 50 Tech Swabs and
10 pairs of latex gloves.
“Want optimal fade resistance? Always print at a resolution
of 720 x 720 or higher. This will create a denser layer of ink,
without over saturating the material, helping the prints last
longer. A side benefit is that the quality of the print will look
better up close!”
-Frank
ea. Liter
SOLARISJV3(COLOR)
SOLARISJV33(COLOR) (Direct Order)
250ml bottle of Ink Remover
SOLUNIVINKRMVR
ea. Liter
SOLARISJV3FFLUID
SOLARISJV33FFLUID (Direct Order)
Universal Cleaning Kit
SOLUNIVCLEANKIT