full PDF - Fellers

Rebel High-Tack RB528H & RB599H
4 Mil Matte White Opaque or 4.0 Mil Gloss Clear
Calendered Vinyl
• Up to 5 year durability
• High tack, permanent acrylic adhesive on a 90lb
SuperFlat liner for maximum process flexibility
• Designed for low energy surfaces such as plastic
• Print compatibility: Solvent, Eco-Solvent, Latex,
UV Curable
• MACtac recommends using ColorGuard
overlaminate
54” x 150 ft
MRB(599HCL or 528H)54150
599HCL - Gloss Clear
528H - Matte White
DPF 8000
3.5 Mil Calendered White Opaque Vinyl with High
Tack Adhesive
• Outdoor durability up to 7 years*
• High tack adhesive for hard to stick surfaces
such as brick, stucco and concrete
• Lay-flat polycoated liner
• Great for wall murals
• Arlon suggests using Series 3220 overlaminates
• Print Compatibility: Solvent, Eco-Solvent, UV and
Latex (HP approved L25500)
* When printed, DPF 8000 is warranted for 6
months on masonry surfaces
30” x 150 ft
54” x 150 ft
AR8000(SIZE)150
Series 3590 Laminate
12 mil Heavy Duty PVC Overlaminate
• Extra thickness for added abrasion resistance
• Designed for dirt bike, ATV, and personal utility
vehicle decals
• Recommended to use with DPF 8000 for low
energy surface decal
54” x 150 ft
AR359054150
Motorcycle / Plastic / Low Energy
Concept 235 MotoMark Grip
4.0 mil Premium Flexible Matte White PVC with
High Bond LSE Adhesive
• Unique “high-bond” acrylic pressure sensitive
adhesive, formulated to adhere to low energy
surfaces like plastics and powdercoated surfaces
• Provides ultimate performance in applications
such as ATV’s, snowmobiles, motocross bikes,
power sport vehicles, helmets, watercraft, and
carts, where adhesion and durability is a must
• Designed to be used with GF Concept 238
MotoMark 12mil “ARMOR” gloss clear UV
overlaminate
• Print compatibility: Solvent, Eco-Solvent, Latex,
UV Curable, and Thermal
“Some manufacturers recommend using their
standard laminates with low energy vinyls.
General Formulations has a heavy duty 12
mil laminate, MotoMark Armor (see page 36),
that’s designed specifically
for use with MotoMark
vinyl when wrapping
ATV’s, snowmobiles and
motocross bikes.”
– Frank
What Is A Low Energy Surface?
“Certain plastics, including polypropylene and polyethylene,
have low surface energy. This property inhibits
an adhesive’s ability to ‘wet out’ or bond to the
surface. This, of course, causes problems
with adhesive-backed vinyls, leading to weak
bonds or failure of the applied graphic. Some
examples of low energy surface applications
are motocross bikes, ATV’s, coolers, etc. With
recent advancements in adhesives, there are now
adhesive-backed vinyls designed specifically for
low energy surfaces.”
– Frank
15" x 150 ft
24" x 150 ft
30" x 150 ft
54" x 150 ft
CONCEPT235GRIP(SIZE)150
ORAJET 3105HT
4 Mil Calendered Gloss White PVC with High-Tack
Permanent Adhesive
• 7 Year outdoor durability
• Specially formulated opaque grey-pigmented
adhesive with a high initial tack and final
adhesion
• 90# PE-coated silicone paper liner
• Great for graphics on hard-to-stick, low-energy
plastics (like polyethylene and polypropylene)
with a smooth or slightly textured flat surface,
such as kayaks, ATVs, coolers, and Porta-Johns
• ORACAL suggests laminating with ORAGUARD®
Series 270, 280, 290, 290F, 293
• Print compatibility: Solvent, Eco-Solvent
54" x 30 ft
54" x 150 ft
O3105HTG54(30 or 150)
ORAJET 3951HT
2 Mil Cast Gloss White Inkjet Vinyl with High-Tack
Permanent Adhesive
• 7 year outdoor durability
• Grey, solvent-based, permanent adhesive with
high initial tack and final adhesion
• 90lb PE-coated silicone paper liner
• Specially developed for long-term graphics
applications on “hard-to-stick” substrates such
as low energy plastics and rough or textured
surfaces.
• ORACAL suggests laminating with Oraguard 290
• Print compatibility: Solvent, Eco-Solvent, UV,
Latex
54" x 75 ft
54" x 150 ft
O3951HTG54(75 or 150)
21
Wrap Vinyl