full PDF - Fellers

JV3/JV33 Cleaning Kit
Contains 10 swabs, 20 wipes, 1 Capping cleaning
kit, 10 wipers, and 4 pipettes.
TRIJV3CLEANKIT
TRIJV33CLEANKIT
Flushing Fluid
For JV3 Printers and JV33 Printers
ea. 1 liter
TRIJVSJV3FFLUID
TRIJVVJV33FFLUID
JV3 Wiper Blades
Small rubber blade that wipes the nozzle plates
during the cleaning process. Must be replaced
regularly to prevent build up on
and around the print head.
(10 pack)
TRIWIPERBLADE
JV3 Print Head
Mechanical part of the printer’s ink train
responsible for jetting the ink to the media.
TRIPRINTHEAD
JV3 Pump
Peristaltic pumps are used to suck ink during
cleaning or filling up ink. Peristaltic pumps are not
ever lasting and have to
be checked regularly to
prevent leaks.
TRIPUMP
JV3 Damper (Wide)
A small container with a screen for filtration placed
over print heads to dampen ink movements during
printing. Screen can become clogged and prevent
correct ink flow causing ink
starvation.
TRIDAMPERWIDE
JV3 Damper
A small container with a screen for filtration placed
over print heads to dampen ink movements during
printing. Screen can become clogged and prevent
correct ink flow causing ink
starvation.
TRIDAMPER
Mfg in the USA by
LiqueColor, Inc
Solaris Universal Ink Remover and
Cleaning Kit
Solaris Ink Remover is safe use on most ECO/LT/
FULL solvent printer’s plastic and painted metals
without fear of damaging your cleaned part, and
rubber wipers, capping stations, cleaning around
the printheads, print platens and heaters. May
be used on Mimaki, Roland, Mutoh, Seiko and
HP printers. Not recommended for use as a head
wash. Sold as a 250ml bottle, or buy in a cleaning
kit with 250ML of Solaris Ink Remover (with flip top
cap), 50 Tech Swabs and 10 pairs of latex gloves.
250ml bottle of Ink Remover
SOLUNIVINKRMVR
Universal Cleaning Kit
SOLUNIVCLEANKIT
JV33 Wiper Blades
Small rubber blade that wipes the nozzle plates
during the cleaning process. Must be replaced
regularly to prevent build
up on and around the print
head.
(10 pack)
TRIJV33WIPERBLADE
JV33 Print Head
Mechanical part of the printer’s ink train
responsible for jetting the
ink to the media.
TRIJV33PRINTHEAD
Printer Maintenance and Cleaning
JV33 Damper (Wide)
A small container with a screen for filtration placed
over print heads to dampen ink movements during
printing. Screen can
become clogged and
prevent correct ink flow
causing ink starvation.
TRIJV33DAMPERWIDE
Oce Polyester Wipes
Lint free cloth for cleaning
ink splatters off the
printer. Generous 9” x
9”size.
150 Qty.
POLYWIPES
CGS-80 Cleaning Solvent
For maintenance of piezo inkjet
printers using 3M UV inks.
CGS80
Ships ground service only
One Pass Dust Removal Rollers
Use this roller to remove
dust and other particles
from the surface of
your materials before
applying graphics.
Oce Large Cleaning Swabs
Use these lint free swabs
to clean print heads.
Measures 1/4” across the
tip with a 6” polypropylene
handle.
LGSWAB
TechSwabs 2306
TechSwabs are ideal for digital machinery
cleaning and maintenance. The foam head is
heat sealed onto the handle to prevent adhesive
residue. TechSwabs measure 1/2” across the tip
with a 5”polypropylene handle.
Printing tip for optimal fade
resistance: Print at least
720 x 720 or higher.
“Want optimal fade resistance?
Always print at a resolution of 720
x 720 or higher. This will create a
denser layer of ink, without over
saturating the material, helping the
prints last longer. A side benefit
is that the quality of
the print will look
better up close!”
-Frank
per gallon
12” (includes 1 pad with 50 sheets)
ONEPASS12
9”x 13” (extra pad - 50 sheets)
PAD
500 Qty. ea.
50 pack ea.
TECHSWAB
67
Equipment