full PDF - Fellers
full PDF - Fellers
full PDF - Fellers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Magnetic Vinyl - Visit FELLERS.com For Clean and Care Instructions<br />
Adhesive Backed Magnetic<br />
60 Mil 100 ft. rolls. Acrylic adhesive.<br />
Good for outdoor use.<br />
ea.<br />
1/2”x 100 ft roll<br />
1/2MAG100<br />
ea.<br />
1”x 100 ft roll<br />
1MAG100<br />
A Pole and B Pole<br />
Magnetic For Attachments<br />
Great for lightweight banner installation for<br />
trade shows or other applications. A and B pole<br />
magnetic strips match up perfectly with no<br />
slipping. 60 mil matte black. Acrylic adhesive<br />
good for outdoor use. You will need one roll of A<br />
and one roll of B magnetic for installation.<br />
ea.<br />
1/2”x 100 ft roll 60 mil<br />
MAGPOLE(A or B)1/2<br />
Pre-cut Magnetic Blanks<br />
• Save time with pre-cut blanks<br />
• Magnetized 14 poles per inch<br />
• 30 mil matte white<br />
• Available individually or by<br />
the case for best price<br />
• All blanks have round corners<br />
• Three popular sizes<br />
GOOD FOR<br />
VINYL<br />
GOOD FOR<br />
PAINT<br />
GOOD FOR<br />
SCREEN<br />
PRINTING<br />
Pre-Cut Pricing<br />
Size Price ea. Case of 25 ea. blank<br />
12”x 18” MAG1218<br />
12”x 24” MAG1224<br />
18”x 24” MAG1824<br />
Print Full Color Magnets on Your<br />
Solvent Ink Jet Printer<br />
DigiMag® VINYL works with a variety of solvent<br />
ink jet printers including Mutoh and Roland.<br />
Unique printing surface brings out the brilliant<br />
color of your creations. Easy to score, cut or<br />
die cut. Available in matte and gloss. 20 mil<br />
magnetized to 16 poles per inch, 30 mil magnetized<br />
to 12 poles per inch. Visit www.FELLERS.com for<br />
profiles for DigiMag.<br />
20 Mil Matte (16 ppi)<br />
24.375" x 25 ft<br />
24.375" x 50 ft<br />
DIGIMAGSOL20MIL(25 or 50) 3" cores<br />
20 Mil Gloss (16 ppi)<br />
24.375" x 25 ft<br />
24.375" x 50 ft<br />
DIGIMAGSOL20MILG(25 or 50) 3" cores<br />
30 Mil Matte (12 ppi)<br />
24.375" x 25 ft<br />
24.375" x 50 ft<br />
DIGIMAGSOL30MIL(25 or 50) 3" cores<br />
30 Mil Gloss (12 ppi)<br />
24.375" x 25 ft<br />
24.375" x 50 ft<br />
DIGIMAGSOL30MILG(25 or 50) 3" cores<br />
NOTE: Roland VersaCAMM will not work with 30mil DigiMag.<br />
Use your solvent ink jet<br />
printer to print magnetics!<br />
40” Wide Solvent Printable Magnetic<br />
• 40”x 25 ft 30 mil matte white magnetic<br />
• Greater yield for vehicle signage and wide<br />
format printing<br />
• Caution: Confirm both printer & ink<br />
compatibility before <strong>full</strong> use of product.<br />
• Profiles available for download at www.FELLERS.com<br />
40”x 25 ft<br />
CARSAFEWIDE25<br />
* CAUTION: Magnetic vinyls can cause<br />
permanent damage to painted surfaces<br />
unless properly maintained, which<br />
includes daily removal. CAR-SAFE<br />
is safer, but still requires the same<br />
cleaning recommendations. FELLERS<br />
is not responsible for vehicle damage.<br />
Please visit www.fellers.com/support for<br />
magnetic clean and care instructions.<br />
“Make sure the area of your<br />
car where you want to place<br />
the magnet is fairly flat or has<br />
only a mild curve, and that the<br />
entire surface is metal. If some<br />
areas are plastic or fiberglass,<br />
gaps can form, allowing wind to<br />
get under your magnetic sign<br />
and pull it off. Even new cars<br />
sometimes have unreported<br />
fiberglass repairs to metal<br />
surfaces. Therefore,<br />
it is important to<br />
test the entire<br />
surface for<br />
proper magnetic<br />
adhesion.”<br />
-Frank<br />
65<br />
Specialty Vinyl
Change language