full PDF - Fellers

Vinyl and Rivet Application Tools
92
Roller L and VCAT-2
Vehicle channel applicator
tools for effectively working the heated
vinyl into deep channels. Proper technique
includes bridging the film over the
channels, heating the film and then
working it into the channels. It
is essential that you refer to
Product and Instruction Bulletin
V-Tools for complete details.
3MROLLERL
3MVCAT2
Roller S
VCAT-2
Use Roller S for post-application
finishing to help prevent lifting
after the film has been applied,
apply heat to the graphic to reduce the internal stress in
the vinyl film. Press the stretched areas of film with 3M roller S
while the vinyl is still hot. This helps fully wet-out the adhesive
onto the substrate and reduces the risk of lifting.
YPEN
391X
392X
ea.
ea.
ea.
ea. 3MROLLERS
YelloPen
The air release tool that looks, works and clicks - just
like a pen! Plus the sharp tip safely stores away
with just a click. Made in Germany.
391X Retractable Air Release Tool
Puncture film already applied to a substrate to remove
entrapped bubbles. Fits in your pocket.
ea. Replacement Pin
ea.
PIN
Pin Vase Replacement Pins
PINRFL
pack of 12
Pin Vise
Great for lifting, perforating, and weeding.
Roller L
Roller S
“Don’t forget to wrap the roofs
of vehicles for parking lots near
tall buildings, in cities, or near
sports stadiums!”
-Frank
ea.
BURNISHER
Stylus Burnisher
Wooden handled burnisher tapered at one end, with a
needlepoint at the other end for piercing and picking. Includes
protective cork for needlepoint.
NPT-10 Needle Point Wheel
A economical pin wheel that really works! A greatair release tool.
NPT10
ea.
MPP1 Power Grip Multi-Pin
Air Release Tool
With multiple pins, only a single press is needed to remove
bubbles, saving time and energy. Excellent over rivets.
Comes with box of 48 replacement pins inside handle.
MPIN
YBRUSH
ea.
YelloBrush
2 in 1 handy rivet brush and air release tool. Heat gun or torch
in one hand and YelloBrush in the other. Heat it, pop it, brush it –
done. Now that’s a time-saver!
1” Rivet Brush
Mfg. by
E. Gornell & Sons
Great for applying vinyl over rivets and other
surface irregularities!
RIVET
ea.
RBA3 Power Grip Rivet Brush Applicator
The larger handle of the 1” rivet brush gives you better
control and more comfort. Used for applying
vinyl over rivets and irregular surfaces.
RBA3
ea.
CMP1 Power Grip Magic Pad Applicator
Large handle grip for control and comfort. Foam pad makes it
easy to conform heated vinyl over rivets or other
irregular surfaces. Great for digital graphics too.
RIVPAD
ea.