full PDF - Fellers
full PDF - Fellers
full PDF - Fellers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Unique bracket design allows<br />
tapered fiberglass arm to be<br />
removed without removing<br />
bracket from the pole. Simply<br />
remove pin and slide fiberglass<br />
arm out of banner bracket.<br />
Engineered Pole<br />
Banner Kits<br />
The only pole banner kit warranted for<br />
10 years! The revolutionary Airow ®<br />
system uses a specially shaped<br />
fiberglass rod to achieve a significant<br />
reduction in wind force when compared<br />
to other bracket systems. The Airow ®<br />
system reduces wind load on the<br />
mounting pole without mechanical parts<br />
that will age and wear.<br />
• Engineered eccentrically tapered arms flex to dissipate up to twoand-a-half<br />
times more wind force than other pole banner kits.<br />
• When the banner is installed, arms put banner in tension to transfer<br />
wind force to fiberglass.<br />
• Flexibility of the arms allows banner to return to original position<br />
when wind subsides.<br />
• Airow system is warranted for 10 years against breakage caused by<br />
wind up to 100 mph.<br />
• Visit www.kalamazoobanner.com/hardware/index.php for a video<br />
that shows how wind is dissipated by the Airow ®<br />
• Visit www.kalamazoobanner.com/windforce.html for a wind force<br />
calculator<br />
• 5/8” bands are almost twice as strong as 9/16” bands!<br />
Airow Pole Kits Include:<br />
Main banner assembly mounting, two banner arms or brackets to display one<br />
banner, one at the top and one at the bottom. Includes four 40 inch stainless<br />
steel bands in natural finish, and zip ties.<br />
For Double Banner Applications<br />
Please order two Airow pole kits. This will give you the necessary<br />
components to display two banners on one pole.<br />
Airow ® Pole Kits<br />
24” AIROW24<br />
30” AIROW30<br />
The Pole Banner Brackets Installed<br />
and Specified in 5 Continents<br />
• Patented pole banner kits<br />
• Two piece cast aluminum base with<br />
patented absorption spring<br />
• 3/4” removable fiberglass banner arm<br />
with tempered aluminum sleeve<br />
• Aluminum sleeve prevents rod wear<br />
and adds 20% more strength to arm<br />
• Banner arm angles away from banner<br />
at rod tip, keeps outside banner edge<br />
taut<br />
• Easy mounting with standard tools<br />
• Holds banners up to 17.5 sq. feet<br />
• Available at any arm length on a<br />
custom basis<br />
Banner Saver Pro 2000<br />
Pole Banner Kits<br />
24”<br />
BANNERSAVER24<br />
30”<br />
BANNERSAVER30<br />
Pole Banner Kits<br />
only Banner Saver has an aluminum<br />
sleeve to prevent the “wallowing out”<br />
effect that happens to regular<br />
fiberglass poles.<br />
2 piece cast aluminum base<br />
with absorption spring<br />
Kits include 2 Banner Saver Pro 2000 arms, 6 stainless steel bands,<br />
safety pin, banner zip tie and instructions.<br />
Wind force impact on Banner SaverPro 2000<br />
with patented absorption springs<br />
Direct Order Bands for Square Poles: Regular bands<br />
are tensioned by hand and can only get so tight. If<br />
the bands are not tight, the brackets and bands will<br />
move from wind force. This is fine on round poles<br />
because there are no corners. That movement on<br />
square poles will eventually cause the bands to weaken and<br />
break on the corners. That is why we recommend direct ordering<br />
the Band-it Tool and matching bands for square poles. The Bandit<br />
Tool has the capability to tension bands over 2400 lbs. When<br />
ordering you must provide dimensions of the pole for correct<br />
band length.<br />
113<br />
Banner
Change language