Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
End Delivery Shuttles, Bobbins & Pirns<br />
bluster bay end delivery shuttles<br />
Simple but ingenious tension<br />
system is versatile enough to<br />
accommodate all yarns. Six<br />
small brass hooks tension<br />
the yarn as it slides off the tip<br />
of the bobbin. Finely crafted from<br />
native and exotic hardwoods with a satiny,<br />
smooth finish. Choose from open or closedbottom<br />
styles in two lengths. Uses pirns, not included.<br />
13” Open-bottom (Use 5.5” pirn) # 68001300 • $89.95<br />
13” Closed-bottom (Use 5.5” pirn) # 68001310 • $89.95<br />
15” Open-bottom (Use 8” pirn) # 68001500 • $93.95<br />
15” Closed-bottom (Use 8” pirn) # 68001510 • $93.95<br />
12” Closed-bottom (5” paper quills) # 68001200 • $34.95<br />
14” Double Bobbin Open-bottom* # 68001410 • $56.95<br />
14” Double Bobbin Closed-bottom* # 68001420 • $56.95<br />
14” Swedish Closed Bottom (3.5” quills) # 68001400 • $37.95<br />
14” Swedish Double Closed Bottom (3.5” quills) # 68001430 • $42.95<br />
*These double-bobbin shuttles take 4” bobbins instead of pirns.<br />
End-delivery shuttles will improve your selvedges and make<br />
weaving more fun by eliminating the need to hand manipulate<br />
each weft shot for an even selvedge. A throw back to the<br />
industrial revolution, the end-delivery tensioning system was<br />
used on fly shuttles in textile mills. <strong>Yarn</strong> feeds smoothly and<br />
evenly off the end of a stationary bobbin, or pirn, as the shuttle<br />
scoots across the warp. Tension is controlled in the shuttle.<br />
Leclerc Plastic Bobbins<br />
Leclerc’s plastic bobbins have flat<br />
ended flanges designed to work<br />
well in the square-shaped interior<br />
of Leclerc’s boat shuttles (and many other manufacturers’).<br />
4" bobbin # 61440000 • $0.99 ea or $10.80/12<br />
6" bobbin # 61460000 • $1.70 ea or $18.00/12<br />
Schacht Plastic Bobbins<br />
Schacht plastic bobbins have<br />
nub–ended flanges on each<br />
end to prevent the bobbin<br />
from getting stuck in the<br />
rounded interiors of Schacht boat shuttles. Sold individually or in<br />
groups of 10.<br />
4" bobbins # 6444000P • $1.00 ea or $9.00/10<br />
5" bobbins # 6445000P • $1.50 ea or $14.00/10<br />
6" bobbins # 6446000P • $1.60 ea or $15.00/10<br />
Quills<br />
(Pack of 10) Before there were plastic bobbins there were quills.<br />
Cardboard quills are too narrow to fit on most single-ended bobbin,<br />
so you’ll have to wind them by hand, use a double ended bobbin<br />
winder or a special quill winder. Available in 3.5”, 4”, 5” and 6”<br />
lengths. Sold in packages of 10.<br />
3.5” Cardboard Quills # 65030000 • $5<br />
4” Cardboard Quills # 65040000 • $5<br />
5” Cardboard Quills # 65050000 • $5<br />
6” Cardboard Quills # 65060000 • $5<br />
Leclerc Hand<br />
End-Feed Shuttle<br />
Leclerc’s hand end-feed<br />
shuttle has a special<br />
tension device that<br />
allows the weaver to adjust<br />
the tension for each type of yarn giving a perfect selvage while<br />
increasing weaving speed. Shuttles are 13” long x 1 3/4” deep<br />
x 1 3/8” high. Weight is 6.8 oz including the pirn.<br />
# 61190000 • $95.00<br />
Leclerc Wood Pirn<br />
Wooden pirn is 6 1/4” long and fits<br />
in the hand end-feed shuttle.<br />
# 61190100 • $2.25<br />
Weaving<br />
Schacht End Delivery Shuttle<br />
Made by Schacht, this shuttle is 12” long and weighs a mere<br />
7 oz! To thread it, just lay your yarn into the slot; it couldn’t be simpler.<br />
Pirn not included.<br />
12” Shuttle 6.25” pirn # 64150300 • $85<br />
15” Shuttle 8” pirn # 64150100 • $86<br />
Schacht 6.5” and 8” Wood Pirns<br />
End-delivery shuttles require special bobbins, called pirns which fit<br />
securely on the shuttle shafts. While they do not rotate, the yarn feeds off<br />
the end of the pirn in a non-tugging motion. They can be wound using<br />
single or double ended bobbin winders. The 6.25” pirns fit all but the<br />
9 in Schacht End Delivery shuttles. The 8” fit Schacht and Bluster Bay<br />
15” End Delivery shuttles.<br />
Schacht 6.25” Wood Pirn #6415040W • $3.50<br />
Schacht 8” Wood Pirn # 6415020W • $3.50<br />
AVL 5.5” Pirns<br />
End-delivery shuttles require special bobbins, called pirns which<br />
fit securely on the shuttle shafts. They can be wound using single or<br />
double ended bobbin winders. Available in 5.5” length to fit<br />
the 13” Bluster Bay End Delivery shuttles.<br />
# 63750000 • $4.75<br />
Bone Folder<br />
Bone folders are wonderful as small pick-up sticks but<br />
once you have one you’ll probably want the other size<br />
too. They are designed as paper folding tools and<br />
work as burnishers. Made of cow bone.<br />
6” # 68000600 • $5.99<br />
8” # 68000800 • $6.99<br />
www.halcyonyarn.com 19