DOWNLOAD a copy - Halcyon Yarn

PLEASE NOTE:
When reeds must be cut to size there won’t be an end
bar on the cut side. Be assured this does not affect the
structural integrity of the reed. If you prefer an end bar we
will special order a reed to your exact length. Allow 6-8
weeks for delivery.
we cannot accept returns on cut reeds
Reeds & Heddle Hooks
Halcyon’s Engraved Brass
Hook
Our most popular and versatile hook - a classic favorite for
every weaver! Halcyon’s brass hook does double duty as a
heddle hook and as a reed hook. The hook is 6.5” in length,
well balanced and a joy to use.
# 66990000 • $7.95
Leclerc Threading Hooks
Leclerc’s fine shaft hooks have a tilt down at the end which
many weavers prefer. Choose from shaft length of 5 1/2”,
8”, or 10 5/8”.
5½” #61408000 • $6.75 (perfect for rigid heddles)
8” # 61670100 • $7.50
10⅝". # 61670200 • $7.95
Schacht Long Straight
Threading Hook
The long straight heddle hook shaft is 7 1/2” long with
an easy-to-grip wooden handle and a small but well defined
hook that fits easily through any heddle eye including
most rigid heddles.
# 64680000 • $7.50
Brass Sleying Hook
For sleying reeds the shorter length and bigger hook of
our brass or plastic reed hooks are easier to use.
Brass Reed Hook
# 68670000 • $5.25
24 phone 1.800.341.0282
Reeds, Raddles & Hooks
We stock industrial quality reeds with welded dents in 4, 5, 6, 8, 10, 12, 15, 18 & 20
dent. Reeds come in four standard lengths 26”, 37”, 46”, and 61”. All are 5” high. For
different lengths, we will custom cut to fit your loom.
Width Carbon Steel Stainless Steel
# 68300 (dent) 0 26” and under $59.00 $69.00
# 68360 (dent) 0 27” to 36” $83.00 $97.00
# 68450 (dent) 0 37” to 45” $103.00 $120.00
# 68600 (dent) 0 46” to 60” $136.00 $160.00
Reeds over 60” long, less than 5” high or more than 20 dents per inch are available by special
order. Call for pricing. Please allow 6-8 weeks for delivery on special order reeds as they must
be manufactured separately. If you don’t see the size you need, call for more information.
Loop Top Raddles
When warping back to front, clamp or rubber band a raddle to your back beam.
The raddle spreads the warp to exact width while you wind it onto the beam. Our
loop top raddles have plated steel loops spaced at 1” intervals. To close the raddle
simply slide a dowel or lease stick through the loops.
36” loop top raddle
# 61530000 • $55
45” loop top raddle
# 61540000 • $68
60” loop top raddle
# 61550000 • $78
Harrisville 22" Raddle
Appropriate for small, light
looms. Pegs space the warp at 1"
intervals (the middle one
is stained darker to help
center your warp). When winding your
warp count in the same increments as epi
and tie each bundle loosely at the cross so
its raddle position will be easy to arrange.
36" & 50" raddles are available by special
order. # 6622000R • $58
Leclerc Wood Lease Sticks
Lease sticks are used to hold the warp cross.
Usually used in pairs so purchase two.
24” # 62042410 • $9.75 each
36” # 62048360 • $9.75 each
45” # 62048450 • $12.50 each
60” # 62048600 • $16.00 each
Pre-Order for 2010!
Schacht Wolf
Raddles
The Schacht Raddles
have built-in clamps
to adapt to the
slanted back beam
of the Wolf looms.
It can be attached to
either the looms back
beam or the shuttle race of the beater.
The raddles come with plated pins inserted
every inch and with holes drilled
every half inch with enough extra pins
included to produce half-inch spacing.
Wolf Pup raddle # 6426001R • $90
Baby wolf raddle # 6425000R • $99
Mighty wolf raddle # 6426000R • $117
Weaving for Beginners
Peggy Osterkamp
Peggy Osterkamp has written a book
with the objective of making weaving
easier for beginners! Included are
sections on rigid heddle weaving, backto-front
and front-to-back warping,
designing and drafting and how
computers impact weaving. 200 pgs
(spiral, bl&wh)
#53940100 • $39.95