MCL-Link Lite Version 2.11 User's Guide
MCL-Link Lite Version 2.11 User's Guide
MCL-Link Lite Version 2.11 User's Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Troubleshooting<br />
1-20<br />
<strong>MCL</strong>-<strong>Link</strong> <strong>Lite</strong> <strong>Version</strong> <strong>2.11</strong> User’s <strong>Guide</strong><br />
If you encounter any problems:<br />
Check that the data is sent correctly from your host (terminal ID, filename ,…).<br />
Check that power is correctly applied to the cradle or PIM.<br />
Check that your terminal is powered ON and in M CL-<strong>Link</strong> mode.<br />
Check communication parameters on the terminal and host computer.<br />
Parameters must be set the same on both the terminal and the host computer.<br />
Check the RS232 parameters on host side (connected to good communication<br />
port, etc.).<br />
Check your RS232 cable.