Important Placement Instructions Enclosed See Lifting - Haas ...
Important Placement Instructions Enclosed See Lifting - Haas ...
Important Placement Instructions Enclosed See Lifting - Haas ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Original <strong>Instructions</strong><br />
<strong>Haas</strong> Technical Publications<br />
Installation, Application and Operator’s Manual<br />
Bar Feeder Positioning<br />
1. Lift the left side of the lathe off the leveling pads and position the alignment plate under the two<br />
leveling screws. Lower the lathe and re-level.<br />
Bar Feeder<br />
Leveling<br />
Pad<br />
ST/DS Lathe Alignment Plate<br />
BAR FEEDER<br />
Leveling<br />
Screw<br />
Alignment<br />
Plate<br />
ST-10<br />
25-1026B<br />
DS-30<br />
ST-20/30<br />
25-1576B<br />
25-10195<br />
96-0013, Rev. BB Aug 2012<br />
LATHE<br />
Big Bore, Gearbox, Extended Push<br />
Lathes with Coolant Collector<br />
Extension<br />
Standard Lathes<br />
2. Lift the Bar Feeder with a pallet jack or forklift. Align the right side leveling screws to the<br />
appropriate holes in the alignment plate. Align the leveling pads with the leveling screws and<br />
lower the Bar Feeder onto the pads.<br />
PAgE 13 OF 66
Change language