HP CX4 & XFP Interface Cards User Guide - HP Business Support ...
HP CX4 & XFP Interface Cards User Guide - HP Business Support ...
HP CX4 & XFP Interface Cards User Guide - HP Business Support ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CAUTION:<br />
When installing or removing an interface card, note the following<br />
guidelines:<br />
• Do not touch the surface-mounted components directly with your<br />
hands.<br />
• Do not use too much force in the operation.<br />
• After removing an interface card, if no new interface card is to be<br />
installed, install the filler panel as soon as possible to prevent dust<br />
and ensure normal ventilation in the switch.<br />
Installing an <strong>XFP</strong> transceiver module<br />
To avoid component damage caused by improper installation, carefully<br />
read the SFP/SFP+/<strong>XFP</strong> Transceiver Modules Installation <strong>Guide</strong> from the<br />
<strong>HP</strong>'s website before installing the <strong>XFP</strong> transceiver modules.<br />
Installing and removing the dedicated <strong>CX4</strong> cable<br />
Installing the dedicated <strong>CX4</strong> cable<br />
Figure 6 <strong>CX4</strong> cable<br />
CAUTION:<br />
Make sure that you have installed the LSPM1CX2P interface card<br />
before installing dedicated <strong>CX4</strong> cables.<br />
Follow these steps to install the dedicated <strong>CX4</strong> cable:<br />
Step1 Wear an ESD-preventive wrist strap and make sure it is properly<br />
grounded. Then unpack the dedicated <strong>CX4</strong> cable.<br />
Step2 Horizontally insert the plug of the dedicated <strong>CX4</strong> cable into the<br />
<strong>CX4</strong> port of the switch and pay attention to the direction of the plug<br />
when plugging it.<br />
8