AT-E-16 (DRAFT) - Air Force Link

The RFSP will bring the form down to the print line and print the first flight strip as sent
by the ARTCC host NAS computer. The printer may be taken off-line to fine adjust the
print line using the vernier enable and line feed or form feed button, if necessary. RFSPs
will automatically form feed at the beginning of each message printer. Also, a
momentary alarm will sound if the RFSP needs operator attention.
2.3.2.2 IER 512 RFSP
The ON/OFF power switch is located next to the A/C power cord connector on the back
of the RFSP peripheral. The front control panel for the IER 512 peripheral features a
green LED power indicator to signal power ON. The ON/OFF LED turns ON to indicate
that the printer is online. The RECEPTION LED will be ON whenever the printer
receives data (flight strip or poll for status).
The ERROR LED will flash indicating a fault condition. A warning bell will sound and
the printer will automatically be set offline. The alarm at the Multibus front panel
assembly in the cabinet assembly will also sound for any of the fault conditions. See
figure 2-3 for RFSP controls and indicators.
11