BajaPPC-750 User's Manual - Emerson Network Power

2.1 Electrostatic Discharge
0002M621-15
2
Setup
This chapter describes the physical layout of the board, the setup process, and
how to check for proper operation once the board has been installed. This chapter
also includes troubleshooting, service, and warranty information.
Before you begin the setup process, please remember that electrostatic discharge
(ESD) can easily damage the components on the BajaPPC-750. Electronic devices,
especially those with programmable parts, are susceptible to ESD, which can
result in operational failure. Unless you ground yourself properly, static charges
can accumulate in your body and cause ESD damage when you touch the board.
CAUTION. Use proper static protection and handle the BajaPPC-750
board only when absolutely necessary. Always wear a wriststrap
to ground your body before touching the board. Keep
your body grounded while handling the board. Hold the
board by its edges—do not touch any components or circuits.
When the board is not in an enclosure, store it in a staticshielding
bag.
To ground yourself, wear a grounding wriststrap. Simply placing the board on top
of a static-shielding bag does not provide any protection—place it on a grounded
dissipative mat. Do not place the board on metal or other conductive surfaces.