ADuM3190 (Rev. 0) - Analog Devices
ADuM3190 (Rev. 0) - Analog Devices
ADuM3190 (Rev. 0) - Analog Devices
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ADuM3190</strong> Data Sheet<br />
ABSOLUTE MAXIMUM RATINGS<br />
TA = 25°C, unless otherwise noted.<br />
Table 7.<br />
Parameter Rating<br />
Storage Temperature (TST) Range −65°C to +150°C<br />
Ambient Operating Temperature<br />
(TA) Range<br />
−40°C to +125°C<br />
Junction Temperature<br />
Supply Voltages<br />
−40°C to +150°C<br />
VDD1, VDD2 1 −0.5 V to +24 V<br />
VREG1, VREG2 1 −0.5 V to +3.6 V<br />
Input Voltages (+IN, −IN)<br />
Output Voltages<br />
−0.5 V to +3.6 V<br />
REFOUT, COMP, REFOUT1, EAOUT −0.5 V to +3.6 V<br />
EAOUT2 −0.5 V to +5.5 V<br />
Output Current per Output Pin −11 mA to +11 mA<br />
Common-Mode Transients2 −100 kV/μs to +100 kV/μs<br />
1 All voltages are relative to their respective grounds.<br />
2 Refers to common-mode transients across the insulation barrier. Commonmode<br />
transients exceeding the absolute maximum ratings may cause<br />
latch-up or permanent damage.<br />
<strong>Rev</strong>. 0 | Page 6 of 16<br />
Stresses above those listed under Absolute Maximum Ratings<br />
may cause permanent damage to the device. This is a stress<br />
rating only; functional operation of the device at these or any<br />
other conditions above those indicated in the operational<br />
section of this specification is not implied. Exposure to absolute<br />
maximum rating conditions for extended periods may affect<br />
device reliability.<br />
Table 8. Maximum Continuous Working Voltage 1<br />
Parameter Max Unit Constraint<br />
WAVEFORM<br />
AC Voltage<br />
Bipolar 560 V peak 50-year minimum lifetime<br />
Unipolar 1131 V peak 50-year minimum lifetime<br />
DC Voltage 1131 V peak 50-year minimum lifetime<br />
1 Refers to continuous voltage magnitude imposed across the isolation<br />
barrier. See the Insulation Lifetime section for more details.<br />
ESD CAUTION