catalogue - KÜHTREIBER sro

three-phase digital inverter machine for welding method mmA, tIG and mIG/mAG
KITin 220 - 270 - 320 MMA - KITin 220 - 270 - 320 HF - KITin 220 - 270 - 320 MIG
new
design
KITin 320 HF
pdescrIptIon
New portable welding machines KITin 220 - 320
mma / hf / mIG are designed as small, light and
powerful digital three-phase inverters.
New generation digital controls ensure not only
optimal settings of the welding characteristics, but
their dynamic adaptation during the welding process
as well. This way a substantially higher quality
weld joint and simplification of welding process are
achieved. A significant benefit is achieved in new
functions, which help to keep the welding arc in an
optimal working area. Due to this arc control technology
excellent results may be achieved even by
less experience welders.
New inverters KITin are designed for welding method
MMA/TIG/MIG/MAG.
Digital and progressive hardware design enabled
significant reduction in weight, dimensions and
consequently also in price of the new KITin inverters.
The structure of the performance part itself is
overdesigned to ensure reliability, high performance
and high load capacity.
KItin mIG are supplied with 2- and 4- roll wire feeder,
which has drifted both main and snub rolls for
smooth usage with steel, stainless steel and aluminium
wire. Rolls have diameter 30 mm.
characterIstIcs
• excellent welding properties
• high performance while maintaining compact
dimension of the machine
• high performance cushion
• simple and intuitive machine controls and parameters
setting
eQUIpment
• new digital II. generation controls for welding
quality enhancement and simplification; ensures
continues readjustment of welding characteristics
to actual conditions during the welding
process
• the option for updating of control software
• digital volt-ampere meter
• fan blower shut off function - the fan blower
runs only when necessary
• remote control connector
• massive and compact design
• practical socket for welding cables and electrodes
at the side cover (except KITin 220-320 MIG)
mma method accessorIes
(MACHINES KITin 220-320 MMA, HF, MIG)
• ARC FORCE PLUS function for arc stabilization
with the option of setting the intensity
• HOT START function for easier arc ignition
• ANTI STICK function for easier detachment of a
sticking electrode
• V.R.D. and START CONTROL protection for assuring
work safety
• DPC and SOFT POWER ON function for problem-free
welding on a common electrical distributor
• It is possible to use rutile, basic and aluminum
electrodes
KITin MMA and HF – practicalpocket for welding
cables, electrodes and other accessories
hf method accessorIes
(MACHINES KITin 220-320 HF)
• setting of gas pre-blow/after-blow, current building
up/ building down, 2/4 cycle, etc.
• PULS welding
• PULS BALANCE for pulse welding
Source of gas heating - code 51036
Sourcee of heating/switchboard -
code 51138
• touch-free ignition
• CYCLE function
• ten memory slots for own programs
mIG method accessorIes
(MACHINES KITin 220-320 MIG)
• continuous tension and wire movement speed
regulation
• SYNERGIC function - automatic setting of welding
parameters
• SOFT START and HOT START functions settings
(for aluminum welding)
• continuous setting of wire burn-down
• continuous setting of arc dynamics
• the option of saving own programs 10x
• the option to use 5 kg and 15 kg wire spool
• high performance and sturdy wire movement
2x2 or 4x4
UsaGe
High performance, excellent welding properties
and tough design predestine these machines for
use in manufacturing and assembly firms, maintenance
facilities, repair shops and heavy industry as
well.
ACCESSORIES FOR MACHINES KITIN 220 - 270 - 320 MMA / HF / MIG
Truck transport K7100
code 51037
Truck transport K7102
code 51042
11