Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Welding machines KühtreIber ®<br />
aae<br />
Auto Arc Extinction - automatic arc extinction (see<br />
picture on page 7 - Start and finishing of welding<br />
process TIG LA)<br />
antI stIcK<br />
At shortage (sticking of electrode) the welding current<br />
automaticaly drops to 10 A<br />
arc force<br />
An electronic function ensuring the arc stability<br />
bUrn bacK<br />
Burning-out of the wire to the girder after finishing<br />
welding<br />
cycle<br />
Possibility of switching between two adjusted values<br />
of current - eligible for materials with different<br />
thickness<br />
doWn slope<br />
Filling a crater at finishing welding<br />
dpc<br />
Dinamic power control - dynamic reduction of machine<br />
power input<br />
MIG/MAG<br />
Metal Inert Gas / Metal Active Gas<br />
mIG/maG<br />
• The easiest to learn, a possibility of automation<br />
• Possible high welding speeds - high productivity<br />
• Enables a better control on thiner materials<br />
• Provides cleaner welds without a slag<br />
• A possibility of welding with tube wire<br />
List of Kühtreiber ® machines functions<br />
easy pUlse<br />
The automatic optimal setting conformably to one<br />
parameter - suitable for the less experienced welders<br />
easy Use<br />
Easy and well arranged operating<br />
end cUrrent<br />
Setting of end current<br />
feed bacK<br />
Automatic stabilisation of speed shift wire<br />
Generator<br />
Eligible for using with mobile power source (generator)<br />
hot start<br />
Function for an easy ignition of the electric arc<br />
Job mode<br />
Possibility of storing your own programmes<br />
View of welding methods according to the welding material type<br />
TIG<br />
Tungsten Inert Gas<br />
tIG<br />
• Provides high quality and accurate welds<br />
• Highly aesthetic and good-looking welds<br />
• TIG AC enables excellent welding of aluminium<br />
and its alloys<br />
• A possibility of automation<br />
• TIG PULS - lower deformation while welding thin<br />
materials; less brought-in warm into the welding<br />
material<br />
lIft arc<br />
Ensures precision ignation of welding arc by<br />
touching (not necessary to scratch) → low abrasion<br />
of wolframe electrode<br />
pUls balance<br />
Determines rate between high currrent and back<br />
current of pulsation<br />
remote control<br />
restore proGram<br />
Simple and fast restoration of all characteristics to<br />
the basic state - preset from the production<br />
soft poWer on<br />
Prevents outage of circuit brakers<br />
soft start<br />
The soft start of welding process. It enables to set<br />
the time of start of wire speed<br />
spot pUls<br />
Functions spotting and interval welding<br />
MMA<br />
Manual Metal Arc<br />
mma<br />
• More suitable for windy, outdoor conditions<br />
• Easier for welding on dirty or corroded metal<br />
synerGIc<br />
Automatic setting of welding parameters<br />
test Gas<br />
Function test gas<br />
tIG pUls<br />
For welding of thin materials; lowering of brought-in<br />
warm into welded material → lesser deformation<br />
UP-DOWN<br />
An UP-DOWN remote control in the handle of the<br />
torch<br />
v.r.d.<br />
Protective system MMA - in idle condition is on output<br />
clamps 15 V - inverter is off; after touching by<br />
electrode the inverter automaticaly turns on<br />
type of metal<br />
mma<br />
mIG<br />
maG<br />
AC-TIG<br />
DC-TIG<br />
Carbon steels •<br />
Low/high -alloyed steel •<br />
Aluminium and its alloys •<br />
Iron •<br />
Copper, brass •<br />
Titanium •<br />
Magnesium - alloys •<br />
Level of staff experience<br />
medium<br />
medium<br />
•<br />
•<br />
low<br />
•<br />
•<br />
•<br />
•<br />
high<br />
high<br />
3
Change language