catalogue - KÜHTREIBER sro

More documents

Recommendations

Info

4 Single phase undervoltage portable inverter machines for welding with stick electrode and tIG method new FéNIx 160 - 200 Designed and manufactured in Kühtreiber descrIptIon FéNIx 160 - 200 are compact, portable low-voltage MMA and TIG welding machines. Design is based on inverter-microcontroller technology using a planar transformer. fénIx machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc ensures its excellent stability even if fluctuating voltage in connections or while using long network cable (up to 200 m length). Machine controls are integrated into the keyboard button, which increases the accuracy and reliability of the machine control. Further advantages of fénIx machine is high performance and efficiency, easy to understand controls and the possibility of connection of remote control. FÉNIX 160 - FÉNIX 200 - FÉNIX 200 PFC characterIstIcs and eQUIpment • May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature). • Optional use of up to 200m (2.5mm 2 cross-section) extension cable. • Enables welding when network voltage drops by as much as 40% (from 140 V) using electrode 1.6; 2.0; 2.5. • Connection of a remote control to regulate welding current • Thermal protection with light indicator • Undervoltage / over-voltage indicators • MMA Method o Function HOT START feature enables easier ignition of coated electrodes. o Function ANTI STICK feature prevents adhesion of coated electrode. o Function ARC FORCE feature ensures arc stability. o V.R.D. = feature = MMA safety system; 15 V at output terminals in resting state. o Function SOFT START MMA (prevents hair breakers). • TIG Method o Manual arc ignition using - LIFT ARC. o Function PULSE. o DOWN SLOPE (deceleration time on end current). o END CURRENT. FéNIx 200 PFC descrIptIon fénIx 200 PFC is a compacted, portable undervoltage welding machine for MMA and TIG welding, which is equipped with PFC (Power Factor Correction). fénIx is constructed by using energy-saving inverter microprocessor technology PFC highest levels with the using of a planar transformer, which modulates the input stream so that it has an almost ideal sinusoidal waveform, which provides up to 92% efficiency of the machine. PFC technology ensures stable welding process with fluctuating voltage el. network, even when using long extension cords and use electric genera- tors, without any apparent difference in the arc. The machine is able to operate from 90 V in el. Network. FéNIx 200 PFC is able to work of the same protection from the network and to get against conventional welding machines up to 40% more power (eg where the machine ejects the fuse at 150 A, FéNIx 200 PFC welded without problems on current of 200 A). The machine has a function to limit the output current by which one can work with the machine in low protection in the network. fénIx pfc is predestined for use on generator, long extension cord and using the weak breakers. FéNIx 200 PFC provides excellent arc stability, simple and easy to understand controls, remote control options, performance and equipment. Machine controls are integrated into the keyboard button, which increases the accuracy and reliability of the machine control. Welding machine fénIx 200 PFC is designed for the most demanding users. characterIstIcs and eQUIpment • May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature). • Optional use of up to 200m (2.5mm 2 cross-section) extension cable. • It is possible to weld while 60% (from 90 V) voltage decline (even with continuos decline) in network - with electrode 1,6; 2,0; 2,5; 3,2; 4,0. • Connection of a remote control to regulate welding current. • Thermal protection with light indicator. • MMA Method o Function HOT START feature enables easier ignition of coated electrodes. o Function ANTI STICK feature prevents adhesion of coated electrode. o Function ARC FORCE feature ensures arc stability. o V.R.D. = feature = MMA safety system; 15 V at output terminals in resting state. o Function of limiting the output/input current to prevent loss of circuit breakers (option of simulation of any protection from 5 to 50 A). o Function SOFT START MMA (prevents hair breakers). • TIG Method o Manual arc ignition using - LIFT ARC. o Function PULSE. o DOWN SLOPE (deceleration time on end current). o END CURRENT. o Function to limit the output current. UsaGe High performance, excellent welding properties a ability to cope with 40 %, actually 60 % (FéNIx 200 pfc) under voltage machines are ideal for use in assembly, in maintenance operations, repairs, heavy industry, but also for domestic use. FéNIx 160 FéNIx 200 FéNIx 200 PFC Code 51225 51226 51240 Power supply 50/60 Hz V 1x ~230 V (-40%; +15%) 1x ~230 V (-40%; +15%) 1x ~230 V (-60%; +15%) Protection - slow A 16 20 20 Welding current range A 10 - 150 10 - 190 10 - 200 Duty cycle 100% (at 40°C) A 110 140 145 Duty cycle 60% (at 40°C) A 125 155 165 Duty cycle (at 40°C) A 150 (25%) 190 (15%) 200 (40%) Mains current/input 60% 16A / 3,6kVA 19,5A / 4,5kVA 20A / 4,6kVA Open circuit voltage V 88 88 88 Protection degree IP 23 S IP 23 S IP 23 S Gladhand 10-25 10-25 10-25 Recomended type of torch SR 17V SR 17V SR 17V Dimensions mm 315 x 112 x 225 380 x 112 x 225 425 x 112 x 225 Weight kg 4,1 4,7 5,5
Single phase inverter machines for welding method MIG/MAG new descrIptIon KITin 2040 MIG and KITin 2040 MIG EURO are portable, single-phase, undervoltage welding machine for welding by MIG/MAG method. They are suitable for professional and amateur using. KITin 2040 MIG - with hard torch an d ground cable. KITin 2040 MIG EURO - with euroconnector (in this type torch is not included). Welding machine was constructed with using the latest technology, it is small, lightweight and with the high efficiency. For its transfer is plastic handle. It is suitable for using on generator, for example for building. Machine allows easing settings of welding parameters. KITin 2040 MIG and KITin 2040 MIG EURO are suitable for welding by filled electrode (cored wire). KITin 2040 MIG - KITin 2040 MIG EURO characterIstIc and eQUIpment • low power consumption of energy and high performance • excellent welding quality • easy setting of welding parameters (welding voltage and wire feed speed set at the same time by one same control element dispense on strength of the welding material, the second control element is for soft voltage adjustment which determines the arc length • low weight and small size • reliable construction • thermal protection • high load factors • place for a coil with wire Ø up to 200 mm • possible to use wire Ø 0,6 – 0,8 mm • torch MB 15 AG is price included (only in type KITin 2040 MIG) UsaGe They are the right choice for their use in production, in metal production, during assembling, in maintenance or utility rooms. KITin 2040 MIG KITin 2040 MIG EURO Code 51064 51147 Power supply 50/60 Hz V 1x230 V ± 15% 1x230 V ± 15% Protection - slow A 16 16 Welding current range A 20-150 (CO ), 20-170 (Ar+CO ) 2 2 20-150 (CO ), 20-170 (Ar+CO ) 2 2 Duty cycle 35% A 150 150 Duty cycle 60% A 120 120 Duty cycle 100% A 100 100 Mains current/input 60% A/kVA 12 / 5,3 12 / 5,3 Open circuit voltage V 22-31 22-31 Protection degree IP 23 S IP 23 S Connection of welding machines fixed EURO Wire feed speed 1-11 m/min. 1-11 m/min. Dimensions mm 470x200x310 470x200x310 Weight kg 14 13 5
Page 1 and 2: . . . welding for everyone . . . K
Page 3: Welding machines KühtreIber ® aae
Page 7 and 8: Welding inverter machines for weldi
Page 9 and 10: OUtDOOr KIt - accessory equipment t
Page 11 and 12: three-phase digital inverter machin
Page 13 and 14: new mIG/mAG compact welding machine
Page 15 and 16: KIT 405 KIT 400W KIT 500 KIT 500W K
Page 17 and 18: mIG/mAG compact welding machines fo
Page 19 and 20: Wire feeders and water cooling for
Page 21 and 22: equipment and spare parts AIR COOLE
Page 23 and 24: equipment and spare parts Self-dark

catalogue - KÜHTREIBER sro

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?