Contacting various metal compositions using ViProbe® Vertical ...

More documents

Recommendations

Info

ViProbe ® ADC Testing in Probe to Data Sheet Specifications. • DNL Results. • Final test program limit: – DNLn: ‐0.850lsb to 0.0lsb – DNLp: 0.0lsb to 0.850lsb Sample Device FT board DNLn = -0.328lsb DNLp = 0.162lsb DNLn = -0.202lsb DNLp = 0.178lsb June 6 to 9, 2010 IEEE SW Test Workshop 50
ViProbe ® ADC Testing in Probe to Data Sheet Specifications. • SNR / SINAD Results. • Final test limit (Fin = 10.3 MHz): – SNR: 62.9dB – SINAD: 62.9dB – H2: ‐75dB – H3: ‐75dB Sample Device FT board 10.3MHz H2 SNR = 64.3dB SINAD = 64.2dB H2 = -83.3dB H3 = -89.1dB H3 10.3MHz H2 H3 SNR = 64.7dB SINAD = 64.6dB H2 = -81.6dB H3 = -93.6dB June 6 to 9, 2010 IEEE SW Test Workshop 51
Page 1 and 2: Denis Deegan Analog Devices Inc Sim
Page 3 and 4: Motivation. ViProbe ® Vertical Pro
Page 5 and 6: Motivation (Cont.) • Temperature
Page 7 and 8: ViProbe ® Vertical Probe Technolog
Page 9 and 10: ViProbe ® Vertical Probe Technolog
Page 13 and 14: CRES Measurement Setup. Method 2:
Page 15 and 16: CRES Measurement Setup. • Experim
Page 17 and 18: Evaluation Results Al, Au, Cu Pad.
Page 19 and 20: ViProbe ® on Al Pad. • Automotiv
Page 21 and 22: ViProbe ® on Al Pad. • Zygo Prof
Page 23 and 24: ViProbe ® on Al Pad. Pass 1 Pass 2
Page 25 and 26: ViProbe ® on Al Pad. • CRES base
Page 27 and 28: ViProbe ® on Au Pad. • EWLP -Au
Page 29 and 30: ViProbe ® on Au Pad. • 3D PMI (Z
Page 31 and 32: ViProbe ® on Cu Pad. • Cu RDL +
Page 33 and 34: ViProbe ® on Cu Pad. • 3D PMI (Z
Page 35 and 36: ViProbe ® on Cu Pad. • Measure C
Page 37 and 38: ViProbe ® on Cu Pad. • Online Cl
Page 39 and 40: ViProbe ® on Cu Pad. • Cu CRES S
Page 41 and 42: ViProbe ® Temperature Probe 160‘
Page 43 and 44: ViProbe ® Temperature Probe 200‘
Page 47 and 48: ViProbe ® ADC Testing in Probe to
Page 49: ViProbe ® ADC Testing in Probe to
Page 53 and 54: Conclusions. • ViProbe ® used su
Page 55 and 56: Acknowledgements. • Analog Device

Contacting various metal compositions using ViProbe® Vertical ...

Create successful ePaper yourself

Delete template?

Save as template?