User Manual QOrder Software - QUORiON

More documents

Recommendations

Info

7. When launching the application on the mobile device it will try to connect to the POS system. If this is not possible it will display “Retry Connection” and the device switches into the demo mode. In this case the mobile device will not communicate with the POS system. When a mobile device is assigned to a POS system it automatically receives a register number from #17 upwards (17 for the first device, 18 for the second device and so on). Alternative: It is also possible to connect the mobile device to the POS system after starting the application QOrder on the mobile device. To do so follow the steps in section “Steps on the POS system” (section 4.4.1), then press the X button on the mobile device followed by the “Log On” button. If you leave the wireless radio range the message “Connection Retry” and/or “Network Error” is displayed. Therefore make your way in the radio range again. 4.6 Download the Program from the POS system 1. Start the QOrder application on your mobile device and assign the device to a POS system, as shown in section 4.4. 2. Press the X button and then “Update / Install”. The mobile device will now transfer the programming of the master POS system and erase the internal transaction memory at the end. The display will show a counter. At the end you get a “Finish” message, which indicates the end of the programming process. Since firmware Qx120412 it is possible to activate an automatic update request on startup. 5 Commissioning 1. Turn on your mobile device. Wait until the device is ready. 2. Start the QOrder application on your mobile device. 3. In the init screen of the application press the “Start QOrder” button. 12
6 User Interface The following illustration shows the standard user interface. Operation view Receipt view Payment functions Correction function Scroll pages Multiplicator Clear Article menu Scroll button Keys fade in/out 13 Numeric keys Keys fade in /out Table functions
Page 1 and 2: User Manual QOrder Software
Page 3 and 4: Table of contents 1 Important Infor
Page 5 and 6: 1 Important Information Please make
Page 7 and 8: 4 Installation The installation of
Page 9 and 10: • Printers which should be used w
Page 11: 4.5.2 Steps on the Mobile Device Pl
Page 15 and 16: 6.2 Legend In the following section
Page 17 and 18: 7.3 Multiplication / Division Inste
Page 19 and 20: 8.4 Tender Correction With the func
Page 21 and 22: Once you completed the current orde
Page 23 and 24: 10.6 Modifiers and Condiments Some
Page 25: 11.2 Additional Function Keys The m

User Manual QOrder Software - QUORiON

Create successful ePaper yourself

Delete template?

Save as template?