XPS-RC - Newport Corporation
XPS-RC - Newport Corporation
XPS-RC - Newport Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>XPS</strong>-<strong>RC</strong> <strong>XPS</strong> Remote Control<br />
EDH0207En1020 — 07/11 4<br />
Once the <strong>XPS</strong> has checked the firmware compatibility of the connected<br />
<strong>XPS</strong>-<strong>RC</strong>, the following screen appears in case the <strong>XPS</strong>-<strong>RC</strong>’s firmware is not<br />
compatible with the firmware of the <strong>XPS</strong> controller.<br />
4.2 POSITION Screen<br />
The POSITION screen is the default screen that appears when both<br />
firmware revisions are compatible.<br />
The displayed values are the current positions. Depending on the configuration<br />
of the <strong>XPS</strong> controller, the number of displayed positions varies from<br />
1 to 8.<br />
Selected<br />
positioner<br />
Current<br />
position<br />
<strong>XPS</strong>-<strong>RC</strong> firmware<br />
revision number<br />
Go to<br />
STATUS screen<br />
Selected<br />
positioner name<br />
<strong>RC</strong> module<br />
(<strong>XPS</strong> firmware)<br />
revision<br />
Go to<br />
MOVE screen<br />
Positioner<br />
has an error<br />
Go to<br />
JOG screen<br />
The <strong>XPS</strong>-<strong>RC</strong> remote control position display is limited to positions between<br />
-2147.483648 and 2147.483648. If the position to display is outside this<br />
range, the displayed value will be one of these limits.
Change language