CCNP TSHOOT 6.0 - Cisco Learning Home
CCNP TSHOOT 6.0 - Cisco Learning Home
CCNP TSHOOT 6.0 - Cisco Learning Home
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CCNP</strong>v6 <strong>TSHOOT</strong><br />
Physical and Logical Topology Diagrams<br />
The baseline physical and logical topologies for the existing EIGRP-based network are provided in this lab to<br />
assist the troubleshooting effort.<br />
Lab Structure<br />
This lab is divided into two main sections.<br />
Section 1—Trouble Tickets and Troubleshooting Logs<br />
This section includes multiple tasks. Each task is associated with a trouble ticket (TT) and introduces one or<br />
more errors on one or more devices. If time is a consideration, each task or trouble ticket can be performed<br />
independently.<br />
Section 2—Troubleshooting Reference Information<br />
This section provides general troubleshooting information that can be applied to any of the trouble tickets in<br />
this lab. Examples of useful commands and output are provided. If time permits, it is recommended that you<br />
read through Section 2 prior to starting on the trouble tickets.<br />
Note: This lab uses <strong>Cisco</strong> 1841 routers with <strong>Cisco</strong> IOS Release 12.4(24)T1 and the advanced IP image<br />
c1841-advipservicesk9-mz.124-24.T1.bin. The switches are <strong>Cisco</strong> WS-C2960-24TT-L with the <strong>Cisco</strong> IOS<br />
image c2960-lanbasek9-mz.122-46.SE.bin and Catalyst 3560-24PS with the <strong>Cisco</strong> IOS image c3560advipservicesk9-mz.122-46.SE.bin.<br />
Other routers (such as 2801 and 2811), switches (such as 2950 or 3550),<br />
and <strong>Cisco</strong> IOS Software versions can be used if they have comparable capabilities and features. Depending<br />
on the router or switch model and <strong>Cisco</strong> IOS Software version, the commands available and output produced<br />
might vary from what is shown in this lab.<br />
Any changes made to configurations or topology (other than errors introduced) are noted in the lab and<br />
trouble tickets so that you are aware of them prior to beginning the troubleshooting process.<br />
Required Resources<br />
• 3 routers (<strong>Cisco</strong> 1841 with <strong>Cisco</strong> IOS Release 12.4(24)T1 Advanced IP Service or comparable)<br />
• 1 switch (<strong>Cisco</strong> 2960 with the <strong>Cisco</strong> IOS Release 12.2(46)SE C2960-LANBASEK9-M image or<br />
comparable)<br />
• 2 switches (<strong>Cisco</strong> 3560 with the <strong>Cisco</strong> IOS Release 12.2(46)SE C3560-advipservicesk9-mz image or<br />
comparable)<br />
• SRV1 (Windows PC with static IP address) with TFTP and syslog servers, plus an SSH client (PuTTY<br />
or comparable) and WireShark software<br />
• PC-B (Windows PC DHCP client) with PuTTY and WireShark software<br />
• PC-C (Windows PC DHCP client) with PuTTY and WireShark software<br />
• Serial and Ethernet cables<br />
All contents are Copyright © 1992–2010 <strong>Cisco</strong> Systems, Inc. All rights reserved. This document is <strong>Cisco</strong> Public Information. Page 4 of 20
Change language