CCNP TSHOOT 6.0 - Cisco Learning Home

CCNPv6 TSHOOT
Step 3: Configure SRV1.
Configure SRV1 with static IP address 10.1.50.1/24 and default gateway 10.1.50.254.
Step 4: Configure a static IP address on PC-C.
Configure PC-C with static IP address 10.1.80.100, subnet mask 255.255.255.0, and default gateway
10.1.80.1.
Step 5: Outline the troubleshooting approach and validation steps.
Use this space to identify your troubleshooting approach and the key steps to verify that the problem is
resolved. Troubleshooting approaches to select from include the follow-the-path, spot-the-differences, bottomup,
top-down, divide-and-conquer, shoot-from-the-hip, and move-the-problem methods.
Note: In addition to a specific approach, you can use the generic troubleshooting process described at the
beginning of Section 2 of this lab.
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Step 6: Record the troubleshooting process and configuration changes.
Note: Section 2 of this lab includes useful commands and examples of output.
Use this log to document your actions and results during the troubleshooting process. List the commands you
used to gather information. As you progress, record what you think the problem might be and the actions you
take to correct the problem.
Device Actions and Results
All contents are Copyright © 1992–2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 17