Digital Mailing System DM400,TM DM500TM and DM550TM

2 • Meet the DM400, DM500, DM550
Parts of the
Mailing System
Mailing System
Exterior
2-6
This section describes the parts of your DM400/DM500/DM550 Mailing
System and includes:
• The Mailing System Exterior
• The Mailing System Interior
• The IntelliLink Control Centre
• The Main Screen
IntelliLink Control Centre - This contains the screen and keypad for communicating
with the mailing machine and the built-in Postal Security Device
(PSD).
Feed and Main Covers - Protect moving parts and prevent foreign objects
from entering the machine. The feed cover protects the feeder and the
main cover protects the transport area.
Thickness Adjustment Knob - You use this knob to adjust for the thicknesses
of the envelopes you are feeding into your mailing system (DM500/
DM550 only).
Platform Scale - The 2kg integrated platform scale is an option.
On/Off switch - Turns the mailing system on and off. This is located on the
lower left side of the feed Deck.
Feed Deck - This is where you load the mail.
Side Guide - Set this to reduce the skewing of pieces of mail as you feed
them into the feeder (DM500 and DM550 only).
Transport Release Knob - You pull this knob out to drop the lower half of
the transport deck if you need to clear a stall.
Art Card Slot - The art card plugs
into the art card slot on the right side
of the IntelliLink Control Centre (as
shown in the photo on the right). The
art card contains advertisements and
inscriptions.
Quick Reference Card Set - These are easy reference cards containing
instructions for performing operations like how to set postage, process
mail, or clear stalls. The cards are located in a slot in the stacker module
of your mailing system.
Stacker - This is where mail is deposited after the postage is applied to the
piece of mail. It is located on the right side of the machine.
SV61964 Rev. A