Take lead on your project with an efficient system concept - Danfoss ...

What is the EvoFlat system solution?
3.5.1 Brazed plate heat exchangers
MicroPlate heat exchanger - for efficient and instantaneous production
of domestic hot water
Type XB06 Type XB 37
The lowest possible return temperature
with instantaneous production of the
required tapping capacity is critical for
the energy efficiency of domestic water
systems in flat stations.
To meet that demand, heat exchangers
with a particularly high level of efficiency
are required. Danfoss uses the
new MicroPlate heat exchanger for its
10%
Better heat transfer
Thanks to an innovative plate design
which optimizes flow velocity
MicroPlate plate pattern
EvoFlat flat stations. These are configured
and dimensioned in accordance
with the requested tapping capacity.
The hot water temperature depends
on the available temperature on the
primary side (supply temperature).
The supply which flows in one direction
is heating domestic water flowing in opposite
directions in the heat exchanger.
21
What is the EvoFlat system solution
Significant benefits:
- Energy and cost savings
- Better heat transfer
- Lower pressure loss
- More flexible design
- Longer life time
- Patented MicroPlate pattern
technology
- Reduced CO2 foot print
The Danfoss heat exchanger connections
and plates are produced from
stainless steel 1.4404 and connected
with copper solder. They are ideal for
use with all standard heating water
and use in domestic water systems. If
in any doubt the water quality must
be checked with the respective supply
company.