Panacea™ Frame and Modules - Biznine.com

Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
The Panacea product line includes an optional power supply mounting
tray, which allows you to mount up to seven 1RU desktop power
supplies or up to five 2RU desktop power supplies. You can mount a
combination of 1RU and 2RU power supplies on the same tray. This
power supply mounting tray can be forward- or rear-mounted into a
regular frame rack. You can install the power supply mounting tray
yourself, if desired. See Appendix H: “Power Supply Mounting Tray
Installation” for instructions.
Optional Integrated Power Supply Mounting Bracket
Assembly and Integrated Power Supply (AC or DC)
Figure 1-11. Integrated Power Supply Mounting Bracket
Assembly and Integrated Power Supplies (2RU Version Shown)
The integrated power supply mounting bracket assembly extends the
frame by attaching to the metalwork and aligning with the power
connector used for the desktop power supplies. It can house any
combination of the two available integrated power supplies (AC or
DC). These two separate power supplies are equipped with either
universal AC (90 VAC to 264 VAC) inputs or with DC (-42 VDC to -60
VDC) inputs. This allows you to have up to two 1 integrated,
hot-swappable power supplies for mission-critical applications. The
power supply module will supply 105 W at 15 VDC. Usually, it will be
installed at the manufacturing facility; however, you can install or
replace the Power supply mounting bracket assembly and integrated
power supply yourself, if desired. (Installation instructions and
specifications are included as part of the power supply bracket
assembly package.)
1 Only one integrated supply is available in a 1RU frame.
Panacea Series Frame and Modules Installation, Configuration, and Operation Manual 11