Panacea™ Frame and Modules - Biznine.com
Panacea™ Frame and Modules - Biznine.com
Panacea™ Frame and Modules - Biznine.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Preliminary—Contents are proprietary <strong>and</strong> confidential. Do not photocopy or distribute.<br />
Data Rates<br />
Sync Input Signal<br />
Chapter 1: Introduction<br />
The 3 Gb/HS/S/R is capable of sensing, switching, <strong>and</strong> reclocking all<br />
SMPTE-defined st<strong>and</strong>ard <strong>and</strong> high definition data rates. (See Table 1-9 for the<br />
data rates supported by each format.) If the module does not recognize the data<br />
rate of the input signal, it will automatically go into Bypass mode <strong>and</strong> route the<br />
input signal without reclocking. If desired, you may set this module to Bypass<br />
mode where it will route any of the input signals to the output(s) without<br />
reclocking, regardless of the data rate of the input signal.<br />
Table 1-9. Data Rates for 3 Gb, High Definition (HS) <strong>and</strong> St<strong>and</strong>ard<br />
Definition (S) Serial Digital Video Routing Switchers<br />
Data Rate 3 Gb Serial Digital<br />
Video Routing<br />
Switcher<br />
High Definition (HS)<br />
Digital Video<br />
Routing Switcher<br />
St<strong>and</strong>ard Definition<br />
(S) Digital Video<br />
Routing Switcher<br />
143 Mb/s2 • • •<br />
177 Mb/s 2 • • •<br />
270 Mb/s • • •<br />
360 Mb/s2 • • •<br />
540 Mb/s 2 • • •<br />
1.485 Gb/s • •<br />
2.977 Gb/s •<br />
The 3 Gb/HS/S/R has a sync input on the rear panel. A video reference signal<br />
can be fed to this module so that synchronous switching can be achieved. (It is<br />
possible for the user to set a variable time delay before the switch is made so<br />
that critical switching will occur at the proper interval.) The sync signal can be<br />
NTSC, PAL, or trilevel.<br />
Monitoring <strong>and</strong> Control<br />
The 3 Gb/HS/S/R can be monitored <strong>and</strong> controlled through any one of various<br />
means. It can be controlled locally via the front panel control option or remotely<br />
via serial, X-Y, or Ethernet with a variety of software packages, including<br />
RouterWorks®, Navigator, <strong>and</strong> Pilot. The various monitoring <strong>and</strong> control<br />
options provide a means to manage the switching of video <strong>and</strong>/or audio signals<br />
through this product as well as <strong>com</strong>municate the status of the input <strong>and</strong> output<br />
signals. The monitoring/alarm capabilities of this product enable you to act<br />
accordingly as the result of an alarm condition, should one arise. See page 63<br />
for alarm configuration details.<br />
Panacea Series <strong>Frame</strong> <strong>and</strong> <strong>Modules</strong> Installation, Configuration, <strong>and</strong> Operation Manual 33