Operating Instructions - Panasonic Business

1
2
3
4
26
Adjusting POS. /SIZE
Display the menu screen.
Select “POS. /SIZE”.
PICTURE
SETUP
POS. /SIZE
SOUND
Select the item and set.
NORMALIZE
AUTO SETUP
H-POS
H-SIZE
V-POS
V-SIZE
DOT CLOCK
CLOCK PHASE
CLAMP POSITION
0
0
0
0
0
1:1 PIXEL MODE
OFF
HV DELAY OFF
Exit the menu.
0
0
To display a menu for adjustment of the POS. /SIZE
menu on the bottom of the screen
H-POS 0
To hide the menu or
2 access
1 select
2 adjust
1 select
Note:
Unadjustable items are grayed out. Adjustable items differ depending on the
input signal and the display mode.
or
2 adjust or select
1 select the menu
Notes:
• Adjustment details are memorized separately for different input signal formats. (Adjustments for component signals are
memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF,
1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)
• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture
position movement cannot be controlled by the POS. /SIZE function.
Helpful Hint ( NORMALIZE Normalization)
While the POS. /SIZE display is active, if the OK button is pressed during “NORMALIZE”, then all adjustment values
are returned to the factory settings.