Aprilia SR 50 servicemanual - Scootergrisen
Aprilia SR 50 servicemanual - Scootergrisen
Aprilia SR 50 servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SR</strong> <strong>50</strong><br />
2.2.7. MIXER OIL IE<strong>50</strong><br />
TOPPING UP<br />
CAUTION The vehicle fits a control unit that manages an<br />
electronic pump controlling the correct quantity of oil for<br />
engine lubrication.<br />
• Remove the front cover, see (REMOVING THE<br />
FRONT COVER).<br />
• Remove the plug.<br />
• Fill with oil, see (LUBRICANT CHART)<br />
• Refit the plug.<br />
AIR BLEED<br />
CAUTION The vehicle fits a self-bleeding electronic pump.<br />
If the oil in the mixer oil tank is low or if the mixer oil line -<br />
from the mixer to the reed assembly - is removed, it is<br />
necessary to bleed the system. Proceed as follows:<br />
• Completely open the throttle grip.<br />
• Keep the throttle open, turn the key to ON.<br />
• You will hear the noise of the pump.<br />
• Look at the mixer oil line going from the mixer to the<br />
reed assembly and keep the throttle completely open<br />
until the line is full of oil.<br />
• Release the throttle twistgrip.<br />
• If necessary, top up with mixer oil as described above.<br />
PERIODIC MAINTENANCE<br />
2 - 31