Tabor Electronics Ltd. - OED

2-9. Rack Mounting
The instrument may be rack mounted in a standard 19
inch rack. The instrument may be rack mounted in
Rack Mount Kit option -002.
2-10. Portable Use
The instrument may be used in applications requiring
portability. A tilt stand consisting of two retractable
legs is provided with each unit.
2-11. Short Term Storage
If the instrument is to be stored for a short period of
time (less than three months), place cardboard over
the panel and cover the instrument with suitable protective
covering such as a plastic bag or strong craft
paper. Place power cable and other accessories with
the instrument. Store the covered generator in a clean
dry area that is not subject to extreme temperature variations
or conditions which may cause moisture to condense
on the instrument.
Figure 2-1. Model 8024 - Outline Dimensions.
2-12. Long Term Storage or
Re-Packaging For Shipment
Installation
If the instrument is to be stored for a long period or
shipped to the factory for repair, proceed as directed
below. If you have any questions contact your local
Tabor representative or the Tabor Service Department
at the factory.
If the original Tabor supplied packaging is to be
used proceed as follows:
1. If the original wrappings, packing material, and
container have been saved, re-pack the instrument and
accessories originally shipped to you. If the original
container is not available, one may be purchased
through the Tabor Service Department at the factory.
2. Be sure the carton is well sealed with strong
tape or metal straps.
3. Mark the carton with the model number and serial
number with indelible marking. If it is to be shipped,
show sending address and return address on two sides
of the box; cover all previous shipping labels.
If the original container is not available, proceed
as follows:
2-3