Data Interfaces

Exercise 1 for Chapter 5
Report name: ZBCE##E1 (active)
ZBCE##E2 (passive)
Main report: RS415057 (active)
RS415058 (passive)
Logical destination: BC415_##
##: Group number
Implement a CPI-C communication between two R/3 Systems
where the data (information about a special airline carrier) is
read from a server system and output in a client system.
Proceed as follows:
1. Create your CPIC destination with Transaction SM54 in R/3
for a server system to be specified by the instructor.
2. Copy the main report RS415057 to your report ZBCE##E1. In
your program, you must fill the places flagged with the
comment *Ad ... . From this active program, you should call
the FORM routine SEND in your passive program ZBCE##E2
which you must also create.
3. Now switch to the specified R/3 server system. There, copy
the main report RD415058 to your report ZBCE##E2. In your
program, you must fill the places flagged with the comment
*Add ... .
4. Then, you can return to the first R/3 System and use your
CPI-C destination to test the connection of both your
programs.