Fax Server - Alcatel-Lucent Eye-box Support

More documents

Recommendations

Info

CONFIGURATION OXO Configuration Compatibility: This feature is applicable with OmniPCX Office release R7.0 and higher. This paragraph describes the basic configuration for the following topology: FAX PSTN ISDN or Analogue trunk OXO : installation number = 91330 Fax DDI number = 4000 SIP trunk All Rights Reserved © Alcatel-Lucent 2008 8AL 90403 USAA ed.02 Page 4 ECS ECS Fax server EDN = 300 Public number =913304000
1. SIP protocol configuration 2. Traffic sharing and Barring - Number of VoIP-Trunk Channels ≥ 2 - Change VoIP Protocol to SIP (warm reset is required) - By default, the OXO is using a timer for outgoing calls on VoIP trunk (SIP / H.323). - (optional) Tick the check box "End of dialling table" and configure the associated table (Numbering - EoD Table). To allow fax reception/transmission between the public network and the ECS through OXO, don't forget to manage the traffic sharing & barring tables for the transit calls: Public trunk ⇔ VoIP link. All Rights Reserved © Alcatel-Lucent 2008 8AL 90403 USAA ed.02 Page 5
Page 1 and 2: Extended communication server: Fax
Page 3: INSTALLATION The FAX server can be
Page 7 and 8: 4. ARS Configuration Create the Gat
Page 9 and 10: 1. Create Virtual Terminals Constra
Page 11 and 12: Configure immediate call forwarding
Page 13 and 14: Private numbering plan: route the o
Page 15 and 16: Note: The used coversheet is the on
Page 17 and 18: COMPATIBILITY with VoIP - SIP servi
Page 19: - www.alcatel-lucent.com All Rights

Fax Server - Alcatel-Lucent Eye-box Support

Create successful ePaper yourself

Delete template?

Save as template?