NOW! 12-13 - Telos

+
+
+
TECHTALK BLOG
TELOSALLIANCE.COM/BLOG
The Telos iQ6 broadcast phone system works with Telos VSet phones,
or with the hybrid controls built into your iQ’s Telco expansion frame.
Connect it to the QOR.32 console engine with a CAT-6 cable, plug in
your phone lines, and start taking calls.
Full-featured Telco controls include
Next, Xfer, Block and Hold keys.
+
BROCHURES
AXIAAUDIO.COM/BROCHURES
6-Fader Telco expansion frame has built-in 6-line controller that
works seamlessly with the Telos iQ6 phone system. The familiar
twin hybrid controls use OLED displays with exclusive Telos Status
Symbols for instant caller information; dial pad lets operator dial
out directly from the console.
+
+
+
SOFTWARE UPDATES
AXIAAUDIO.COM/DOWNLOADS
Desktop-mounted iQ frames don’t
need a furniture cutout. Remove
the end moldings to attach frames
together, or keep them separate -
the choice is yours.
FIND A DEALER
AXIAAUDIO.COM/BUY
What’s better than great-looking?
Long-lasting. iQ’s anodized
machined-aluminum surfaces are
laser-etched. No painted markings
to rub off or fade.
The 10 programmable keys on each
side of the 6-Fader+User Buttons
expansion frame can be mapped to
GPIO functions for control of audio
devices or other logic commands.
Like all Axia consoles, iQ is built
tough. These 100mm. conductiveplastic
faders feel smooth as silk,
but they’re built to handle the punishment
24/7 operation dishes out.
iQ’s high-resolution OLED fader
displays normally show the source
that’s assigned to each channel
strip, but change to give additional
information when operators choose
new audio sources, adjust pan & balance,
or perform other tasks. They
can also work with the Soft Keys just
below to trigger GPIO commands,
step automation events and more.
IP-AUDIO STUDIO NETWORKING | AoIP CONSOLES | AUDIO INTERFACES | IP INTERCOMS | ROUTING AUTOMATION
AXIAAUDIO.COM
+
+
77