Installation and Maintenance Instructions - ETO Doors
Installation and Maintenance Instructions - ETO Doors
Installation and Maintenance Instructions - ETO Doors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
I<br />
J<br />
K<br />
step two:<br />
I&J: After checked the aboved<br />
sizes,then install the protection track<br />
I <strong>and</strong> vertical track J accordingly: THE<br />
VERTICAL PROTECTION TRACKS MUST BE<br />
PARRLLEL.In other words,the distance<br />
between the track must be the same at<br />
the top <strong>and</strong> at the bottom. The top of<br />
the vertical tracks must be level as<br />
compared to each other.If possible<br />
please use the gravity dropper to test.<br />
The tops of the vertical tracks must be level with each other.If two vertical<br />
tracks are not level,cut the bottom of one of the tracks or lift the other.<br />
J<br />
I<br />
step three:<br />
K:Align the horizontal trac ks<br />
K with the door header <strong>and</strong><br />
keep exactly the same distance<br />
between the tracks. This<br />
particular point can be<br />
checked by measuring the<br />
diagonals(a=b).<br />
Fasten the curved part of the<br />
horizontal track to the<br />
vertical track J.<br />
b<br />
a<br />
I<br />
K<br />
J<br />
7