FortiGate-300A - Fortinet Technical Documentation
FortiGate-300A - Fortinet Technical Documentation
FortiGate-300A - Fortinet Technical Documentation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuring the <strong>FortiGate</strong> unit to operate in NAT/Route mode NAT/Route mode installation<br />
Using the setup wizard<br />
From the web-based manager, you can use the setup wizard to complete the initial<br />
configuration of the <strong>FortiGate</strong> unit. For information about connecting to the web-based<br />
manager, see “Connecting to the web-based manager” on page 14.<br />
If you are configuring the <strong>FortiGate</strong> unit to operate in NAT/Route mode (the default),<br />
you can use the setup wizard to:<br />
• add the administration password<br />
• configure the internal interface address<br />
• choose either a manual (static) or a dynamic (DHCP or PPPoE) address for the<br />
external interface<br />
• add a default route for the external interface<br />
• add the DNS server IP addresses<br />
• add the DHCP server settings and IP addresses<br />
• add various internal server IP addresses including web, IMAP, POP3, SMTP, and<br />
FTP servers<br />
• set the antivirus protection to high, medium, or none<br />
Table 7 lists the additional settings that you can configure with the setup wizard. See<br />
Table 5 on page 26 and Table 6 on page 26 for other settings.<br />
Table 7: Setup wizard settings<br />
Password Prepare an administrator password.<br />
Internal Interface<br />
External Interface<br />
DHCP server<br />
Internal servers<br />
Use the information you gathered in Table 5 on page 26.<br />
The Internal interface in the setup wizard refers to Port 1 of the<br />
<strong>FortiGate</strong>-<strong>300A</strong> unit.<br />
Use the information you gathered in Table 5 on page 26.<br />
The External interface in the setup wizard refers to Port 2 of the<br />
<strong>FortiGate</strong>-400 unit.<br />
Starting IP: _____._____._____._____<br />
Ending IP: _____._____._____._____<br />
Netmask: _____._____._____._____<br />
Default<br />
Gateway:<br />
_____._____._____._____<br />
DNS IP: _____._____._____._____<br />
Your <strong>FortiGate</strong> firewall contains a DHCP server to automatically set up<br />
the addresses of computers on your internal network<br />
Web Server: _____._____._____._____<br />
SMTP Server: _____._____._____._____<br />
POP3 Server: _____._____._____._____<br />
IMAP Server: _____._____._____._____<br />
FTP Server: _____._____._____._____<br />
If you provide access from the Internet to a web server, SMTP server,<br />
POP3 server IMAP server, or FTP server installed on an internal<br />
network, add the IP addresses of the servers here.<br />
32 01-28005-0093-20041015 <strong>Fortinet</strong> Inc.
Change language