AerospaceIndustry - Frank Drucklufttechnik

In-Line Tools In-Line Tools
158QGDA-S150B Semi-Automatic Series
Capacity:
Aluminum – .375” (9.5mm)
Titanium – .3125” (7.9mm)
Steel – .3125” (7.9mm)
Stroke:
Max – 1.5” (38mm)
Min. – .5625” (14mm)
158 series motor develops 1.6 nominal horsepower.
Available in straight and piggy-back models with
fixed and variable speed motors.
Semi-automatic operation.
When throttle is activated, the spindle rotates
and feed mechanism engages automatically.
Upon completion of drilling cycle, the spindle returns
to starting position and continues to rotate until
throttle is turned off.
Length of stroke can be adjusted forward and rear.
Overload clutch protects feed mechanism.
Model
STANDARD EQUIPMENT:
3 Jaw Chuck 614929 and Key 849123.
Forward Stroke Adjustment Wrench 614190.
158QGDAB-S150B 158QGDA-S150B
Motor Maximum Stroke Weight Spindle Feed Per Chuck
Inlet
Minimum
Configuration
in. mm lbs kg
Speeds Revolution Capacity Hose Size
158QGDA-S150B Straight 1.5” 38 12 5.44 95, 135, 165, 190 .0005, .001, .002, .375" .375” NPT .375”
215, 245, 265, 350, .003, .004, .006,
380, 420, 445, 525,
700, 750, 850, 900
1100, 1450, 1500, 1745
1800, 2175, 2900, 3600
.008
158QGDAV-S150B Straight 1.5” 38 12 5.44 95/245, 175, 445 .0005, .001, .002, .375” .375” NPT .375”
VARIABLE SPEED 350/850, 750/1800 .003, .004, .006,
1450/3600 .008
158QGDAB-S150B Piggy Back 1.5” 38 12 5.44 55, 80, 95, 110, 125, .0005, .001, .002, .375” .375” NPT .375”
135, 150, 185, 250, .003, .004, .006,
265, 310, 320, 400,
450, 535, 540, 640,
660, 900, 1100, 1460
1740, 2100, 2870, 3440
.008
158QGDABV-S150B Piggy Back 1.5” 38 12 5.44 125/310, 265/640 .0005, .001, .002, .375” .375” NPT .375”
VARIABLE SPEED 450/1100, 1460/3440 .003, .004, .006,
NOTE:
Specify TOOL NOSE when ordering. Standard Noses page 1-9.
Rated tool performance at 90 PSIG measured at tool inlet with motor running.
When selecting speeds and feeds, see page I-5.
SEE PAGES I-11–I-13 FOR SAFETY PRECAUTIONS.
Bushing Thread Length A Part Number
.75 - 16LH 5.625 (143mm) 619662
1 -14LH 5.875 (149mm) 619683
1.25 -12LH 5.875 (149mm) 619704
Bushing Thread Dimension B Dimension C Desc. Part Number
.75 - 16LH 5 (127mm) 3.5625 (90mm) .375 Chuck 614929
1 -14LH 5.25 (134mm) 3.7813 (96mm) Key 849123
1.25 -12LH 5.25 (134mm) 3.7813 (96mm)
Bushing Thread Dim. D Side Feed Dim. D End Feed Part Number*
.75 - 16LH 4.5 (114mm) 3.6875 (94mm)
1 -14LH 4.7188 (120mm) 3.9375 (100mm)
1.25 -12LH 4.7188 (120mm) 3.9375 (100mm)
*See page 1-37 for Selection and Part Number
Bushing Thread
Dim. E - No. 1 MT
613542
Dim. E - No. 2 MT
612934
.75 - 16LH 4.4688 (113mm) 4.5938 (117mm)
1 -14LH 4.7188 (119mm) 4.8438 (123mm)
1.25 -12LH 4.7188 (119mm) 4.8438 (123mm)
1-8 1-9