AerospaceIndustry - Frank Drucklufttechnik
AerospaceIndustry - Frank Drucklufttechnik
AerospaceIndustry - Frank Drucklufttechnik
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Quackenbush ® Self Colleting Machines Quackenbush ® Self Colleting Machines<br />
136SC-B-118 Q-Matic Self-Colleting Drill Motor<br />
Booster Pump Assembly<br />
For increased clamping and feed<br />
force, an optional Booster Pump<br />
(Part No. 621482) is available. The<br />
pump provides extra clamp and<br />
feed when required. The Booster<br />
Pump assembly will increase both<br />
clamp and feed forces by a factor<br />
of 2.5.<br />
Mist Lubricator Assembly<br />
A mist lubricator assembly<br />
is available to introduce<br />
coolant and air to the<br />
cutter. The lubricator is<br />
actuated by air from the<br />
accessory air tap on the motor<br />
side and only functions when the<br />
motor is running. The standard<br />
mist lubricator (Part No. 631878)<br />
can be filled with manually. Fill<br />
reservoir (622900) available for filling<br />
standard manual fill lubricator. The<br />
optional mist lubricator (Part No.<br />
631879) is filled by a pressure pump.<br />
BOOSTER PUMP<br />
Small Large<br />
Manual Fill 631878<br />
Pressure Fill 631879 631880<br />
MIST LUBRICATOR<br />
TEMPLATE BOSS<br />
NOTE: TEMPLATE BOSSES ARE OPTIONAL AND ARE<br />
TO BE SPECIFIED BY CUSTOMER IF REQUIRED.<br />
Collets and Mandrels<br />
(TO FIT HOLE IN TEMPLATE)<br />
(TO FIT COUNTERSINK DIAMETER ON CUTTER)<br />
(TEMPLATE BOSS LENGTH IS .150.)<br />
Template Boss<br />
Application Template Boss Part No.<br />
B C<br />
Template Sink Code<br />
Hole Dia. Dia. No.<br />
.434 .271 623573<br />
.434 .286 623574<br />
.434 .317 623575<br />
.497 .271 623576<br />
.497 .286 623577<br />
.497 .317 623578<br />
.497 .349 623579<br />
.497 .380 623580<br />
.622 .317 623581<br />
.622 .349 623582<br />
.622 .380 623583<br />
.622 .411 623584<br />
.622 .489 623585<br />
.622 .505 623586<br />
Collets and Mandrels are supplied as standard equipment with each tool and must be specified when ordered.<br />
Typical Configuration of Collets for hole sizes<br />
up to .250 in.<br />
INFORMATION NECESSARY TO ORDER COLLETS AND<br />
MANDRELS HOLE SIZE AND COLLET LENGTH CODE<br />
EXAMPLE; Application is to drill a .250 dia. hole in .500 thick material using a template<br />
with a thickness of .125 in. SELECT Template Boss (See Template Boss Length<br />
information above). This application requires a.150 length. Using Material Thickness<br />
Grip Range chart based on .500 material thickness, the collet and mandrel Length<br />
Code is EITHER -40 or -63<br />
ORDER: 250-40 or .250-63 collet/mandrel<br />
Hole Collet<br />
Size Length<br />
Code<br />
Typical Configuration of Mandrels for hole sizes<br />
up to .250 in.<br />
Material Thickness Grip Range<br />
Temp. Boss Collet<br />
Length .150 Length Code*<br />
Series 1000 Standard Collets<br />
.00 - .37 – 23<br />
.18 - .62 – 40<br />
.43 - .87 – 63<br />
.68 - 1.12 – 90<br />
4-30 4-31