AerospaceIndustry - Frank Drucklufttechnik

In-Line Tools In-Line Tools
158QGDB-S600 Series
Capacity:
Aluminum – 1.25” (32mm)
Titanium – 1” (25.4mm)
Steel – 1” (25.4mm)
Stroke:
Max – 6” (152mm)
Min. – 1.75” (44mm)
158 series motor develops 1.6 nominal horsepower.
Piggy-back motor mount reduces overhang.
Length of stroke can be adjusted by rotating
both forward and rear stroke adjustment collars.
Drill feed is activated by rotating feed engagement collar.
Spindle may be returned to starting position at any time during
feed cycle by manually rotating feed engagement collar.
At end of stroke, spindle automatically returns to starting position.
Available in single governed speeds and variable speed ranges.
Overload clutch protects feed mechanism.
STANDARD EQUIPMENT:
3 Jaw Chuck 849415 and Key 849121.
158QGDB-S600
Model
Motor
Configuration
Maximum Stroke
in. mm
Weight
lbs kg
Spindle
Speeds
Feed Per
Revolution
Chuck
Capacity
Inlet
Minimum
Hose Size
158QGDB-S600 Piggy Back 6” 152.4 25 11.34 55, 80, 95, 110, 125, .0005, .001, .002, .5” .375” NPT .5”
135, 150, 185, 250, .003, .004, .006,
310, 400, 535, 660,
900, 1100, 2100,
2870, 3440
.008, .012, 016
158QGDBV-S600 Piggy Back 6” 152.4 25 11.34 55-135, 125-310, .0005, .001, .002, .5” .375” NPT .5”
Variable Speed 265-640, 450-1100, .003, .004, .006,
450-1100, 1460-3440 .008, .012, 016
NOTE:
Specify TOOL NOSE when ordering. Standard Noses page 1-25.
Rated tool performance at 90 PSIG measured at tool inlet with motor running.
When selecting speeds and feeds, see page I-5.
SEE PAGES I-11–I-13 FOR SAFETY PRECAUTIONS.
Bushing Thread Length A Length B Part Number
1 - 14LH 11.5 (292mm) 10.75 (273mm) 621244
1.25 - 12LH 11.5 (292mm) 10.75 (273mm) 621245
1.5 - 12LH 11.5 (292mm) 10.75 (273mm) 621246
2 - 16LH 11.375 (289mm) 10.625 (270mm) 614757
Bushing Thread Dimension C Desc. Part Number
1 - 14LH 9.2813 (235mm) .5” Chuck 849415
1.25 - 12LH 9.2813 (235mm) Key 849121
15 - 12LH 9.2813 (235mm)
2 - 16LH 9.1563 (232mm)
Bushing Thread Dim. D Side Feed Dim. D End Feed Part Number*
1 - 14LH 9.875 (250mm) 9.4375 (239mm)
1.25 - 12LH 9.875 (250mm) 9.4375 (239mm)
1.5 - 12LH 9.875 (250mm) 9.4375 (239mm)
2 - 16LH 9.75 (247mm) 9.3125 (236mm)
*See page 1-37 for Selection and Part Number
Bushing
Thread
Dim. E
No. 1 MT
619533
Dim. E
No. 2 MT
619405
Dim. E
No. 3 MT
619406
Dim. E
No. 4 MT
623931
1 -14LH 10.0625 (255mm) 10.0625 (255mm) 10.1875 (258mm) 9.875 (252mm)
1.25 -12LH 10.0625 (255mm) 10.0625 (255mm) 10.1875 (258mm) 9.875 (252mm)
1.5 -12LH 10.0625 (255mm) 10.0625 (255mm) 10.1875 (258mm) 9.875 (252mm)
2 -16LH 9.875 (252mm) 9.875 (252mm) 10.0625 (255mm) 9.8125 (249mm)
1-24 1-25