Xbase 09 Operating Manual - Cyborgstudio.com
Xbase 09 Operating Manual - Cyborgstudio.com
Xbase 09 Operating Manual - Cyborgstudio.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The on-board step sequencer allows for extensive direct access, even in a live concert situation.<br />
All sound-forming parameters are programmable for every step by simply turning the control<br />
knobs. This is the decisive feature of the XBase<strong>09</strong>.<br />
Depending on the used mode, it is possible to program <strong>com</strong>pletely different sounds for every<br />
single step in a pattern.<br />
Also possible are continous soundchanges over several steps and these features can be used for<br />
bass-, snare- and HiHat-track individually.<br />
Software-Version 2.<strong>09</strong> :<br />
There are also three additional Sequencer-Tracks. Their data is putted out via Midi to control up<br />
to three different outboard soundsources. Notes and length is controlled easily by the knobs on the<br />
XBase<strong>09</strong> front panel. (See V2-Update!)<br />
The internal sequencer enables sound and tone control for each instrument in each step without<br />
the timing delays that MIDI controllers and note-on messages would produce. This is the reason<br />
why the <strong>Xbase</strong><strong>09</strong> grooves so tightly when running on its own, much tighter than if it played the<br />
same pattern in MIDI remote control mode.<br />
Page 6 XBase <strong>09</strong> <strong>Operating</strong> <strong>Manual</strong>
Change language