Z855 – Z875 Z895 – Z8125 SERIES
Z855 – Z875 Z895 – Z8125 SERIES
Z855 – Z875 Z895 – Z8125 SERIES
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Submersible<br />
motors<br />
FW8<br />
Series<br />
APPLICATIONS<br />
Three-phase asynchronous submersible water-filled<br />
motor, with short-circuit rotor and special water resistant<br />
windings.<br />
The choice of component materials ensures optimum<br />
operating performances, superior quality, reliability and<br />
ease of installation.<br />
SPECIFICATIONS<br />
• Shaft extension and coupling<br />
dimensions to NEMA standards.<br />
Rewindable stator<br />
PVC insulation<br />
Protection class: IP68<br />
Fill liquid<br />
The motors are filled with water<br />
containing non-toxic antifreeze. This<br />
liquid, besides protecting the motor<br />
from low temperatures, helps to<br />
inhibit oxidation and improve<br />
lubrication.<br />
• Large compensating<br />
diaphragm for internal liquid<br />
expansion. The motor is also<br />
equipped with a relief valve<br />
enabling the escape of liquid in the<br />
event of abnormal temperature<br />
increases.<br />
• Axial load supported by oscillating<br />
bearing.<br />
• To prevent fluid exchange between<br />
the external and internal<br />
environments, all the standard<br />
motors are equipped with a silicon<br />
carbide mechanical seal.<br />
• Maximum immersion depth:<br />
350 metres.<br />
• Maximum number of evenly<br />
distributed starts per hour: 10<br />
• Maximum supply voltage variation<br />
(415 V +6%, 380 V <strong>–</strong>10%).<br />
Maximum axial thrust: 45,000 N.<br />
• Available versions:<br />
FW8 three-phase: 45 kW to 93 kW<br />
380-415 V; different voltages<br />
available on request.<br />
PVC winding<br />
•<br />
cable.<br />
•<br />
The motors are supplied with 6 m<br />
Ambient temperature: 30°C. The<br />
motors must operate in installations<br />
ensuring a minimum water velocity<br />
around the motor sleeve of 0.20<br />
m/s for 30-52 kW, 0.5 m/s for 55-<br />
93 kW.<br />
OPTIONAL<br />
FEATURES<br />
Special voltages.<br />
• Horizontal installation: all models<br />
except for the 93 kW one.<br />
Inverter applications.<br />
High temperature windings.<br />
• Different materials.<br />
ACCESSORIES<br />
• Panels.<br />
Drop cables.<br />
37